This bus was on display in the centre of Bristol on 21st August 1969, presumably before entering service. The notices invite the public to view the “New Central Exit” bus. I am assuming that this was the first of this type of bus to operate in Bristol. The bright livery helps the already attractive ECW body. Note the use of alternate hopper and sliding saloon windows, quite common amongst deliveries to Tilling Group Companies (although by that time NBC had taken over).
Photograph and Copy contributed by Ian Wild
12/01/15 – 07:09
The first dual-door REs for Bristol Joint Services were nos. C1109 – 1125 (UHU 211 – 221, 323 – 328H). Illustrated is no. C1118. The first of these entered service in August 1969 in the revised livery for one-man operated buses. All previous REs for Bristol had been delivered as B53 or 50F but those for Cheltenham District Traction, Gloucester Joint Services and certain of the Bath allocation had subsequently been rebuilt to two-door layout.
Southern Vectis Omnibus Company 1968 Bristol RESH6G Duple Northern C45F
KDL 885F is a Bristol RESH6G with Duple Northern C45F body. Fleet number 301 in the Southern Vectis fleet, she is seen at the King Alfred Running Day in Winchester on 1 January 2010. Please note that the 2015 event has moved away from New Year’s Day and will be held on Sunday evening 3rd May and Bank holiday Monday 4th May instead – and in the hope of better weather!
Photograph and Copy contributed by Pete Davies
23/02/15 – 07:50
Very clean, crisp lines and a sympathetic application of livery. Altogether a pleasing coach – and an unusual body choice for a Tilling company, although Southern Vectis always seemed to display a certain disregard for centralised purchasing policy. Perhaps it’s to do with being an off shore island!
Petras409
23/02/15 – 08:50
Thank you, Petras. Sadly, the Isle of Wight isn’t far enough “off shore” to qualify as a tax haven, although I think my neighbour’s children have the right idea. They went to Cowes a couple of years ago and, when they were in the queue for coming back to Southampton, the elder one said to his brother “We’re waiting for the ferry back to England.”
Pete Davies
23/02/15 – 14:34
In the mid-1970’s, I managed the telephone billing section of Portsmouth Telephone Area, based in Southsea, which covered the Isle of Wight. On one occasion, I dealt with an irate customer living on the IoW, who said she wasn’t satisfied with my reply on the telephone and was ‘coming over from the mainland’ to see me in person. I think that local authority re-org in 1973, which took the IoW out of Hampshire and gave it its own council, gave them a sense of inflated importance!
Chris Hebbron
23/02/15 – 14:34
There were nine coaches built with this body/chassis combination, four for Hants and Dorset, four for Eastern National and this one. The only other two RESH chassis had ECW bus bodies fitted out for DP, delivered to Midland General. There were also a few RELH with Duple Commander bodies, with Hants and Dorset and Eastern National again amongst the operators.
Gary T
23/02/15 – 15:50
I’ve found a photo of one of the Hants and Dorset quartet and although only a few months older it is an earlier version of the Commander and has unusual upper windows. www.flickr.com/photos/ The Eastern National examples were similar to the Southern Vectis one.
Gary T
24/02/15 – 06:17
Sorry, Chris, but the Isle of Wight was never part of Hampshire, but people got this idea because at one time education, police, fire and ambulance services were shared. At one time, the island even had a governor, but now it has a lord lieutenant just like any other county. Check on the island websites if you want to know more.
David Wragg
25/02/15 – 06:07
When I used to work in Hampshire, I had a good relationship with my opposite number, who worked in Newport IoW. I always smiled, when he referred to us as his colleagues on the North Island.
Petras409
27/02/15 – 07:05
Wasn’t this coach 6HLW-engined at first, and a 39-seater? I believe that after a “poor-showing” on an extended tour it was re-engined with a 6HLX, either the following year, or pretty soon after. Was it up-seated at the same time?
Philip Rushworth
27/02/15 – 09:13
Thx for correcting my misapprehension, David. I recall its DL vehicle registration mark and wondered if it was subsumed into Hampshire’s in 1973. Maybe not, then. Loved the ‘North Island’ remark, Petras409. I’ve just remembered that I looked at a wall map of Southampton/Portsmouth/IoW area when aboard the Cherbourg-Southampton ferry in its last season. The map showed ‘White Isle’ in the centre. It was a brave, but misguided attempt at using ‘possession’, but the spelling????
Chris Hebbron
27/02/15 – 13:28
The Isle of Wight was part of Hampshire until 1890. Censuses that come up in family history searches say, for example “Carisbrooke, Hampshire” and “Whippingham, Hampshire.” One of my farmer cousins at the western point of the Island admits that visiting overners are good for the economy, but reckons that there ought to be a drawbridge to keep them where they belong once they’ve gone back to the mainland. Some time ago I asked whether anyone else could recall a single-decker with an oval back window that ran from Freshwater to Alum Bay, and I think I’ve found the answer: a Reo (not part of the Southern Vectis fleet) which ran right up till 1949. Another oval-windowed single-decker pictured on p 57 of Richard Newman’s “Southern Vectis–the first 60 years” was a Guy Chaser, DL 5277, but that was sold in 1935. It’s gone midday: time for my nammut.
Ian T
27/02/15 – 15:49
Apparently the Wight name of the island has nothing to do with colour, but it apparently means a separate place or a separated place. Rather apt, really. How they loved their “DL” registration code, managing to keep it during the 1974 changes and after. They lost it in the major 2001 change, but still have a unique identifier as “HW”. Sorry, a bit off piste as a comment, but the above contributions reminded me of this.
Michael Hampton
27/02/15 – 16:51
Michael, the ‘Oxford Names Companion’ states “Wight, Isle of (the county). Vectis c.150, Wit c.1086 (Domesday Book). A Celtic name possibly meaning ‘place of the division’, referring to its situation between the two arms of the Solent”. This ties in nicely with your “separated place” explanation. I like your comment “How they loved their “DL” registration code”, but as a young enthusiast I did too, even though I lived ‘up North’. Those lovely IoW registrations, the ‘Cuddles’, ‘Diddles’, ‘Fiddles’, Middles, ‘Piddles’, ‘Tiddles’ and Widdles’ – wonderful one and all.
Brendan Smith
28/02/15 – 05:54
I see that Brendan and I seem to share Benny Hill’s “lavatorial” sense of humour!
Pete Davies
28/02/15 – 05:55
On a recent holiday coach tour from East Yorkshire we had a very able driver who lived on the IoW on the round the island tour he never stopped talking on driving off the ferry at Southampton he welcomed us back to the North Island.
Ken Wragg
28/02/15 – 05:57
Philip, this coach was indeed originally fitted with the smaller Gardner 6HLW engine when new. As you comment, it was soon re-engined with the larger 6HLX unit. Apparently this followed an embarrassing incident whereby passengers on a coach tour had to disembark, in order for 301 to reach the top of a hill. As a young enthusiast, I was very fortunate in seeing this beautiful coach in Harrogate when quite new, and still have a not very good black and white photograph of it, parked on Esplanade, at the bottom of Cold Bath Road. Whether it had the more powerful 6HLX engine by then I do not know, but given the steepness of some of the hills around the area, I sincerely hope that it had!
Brendan Smith
28/02/15 – 09:48
Is that tale of the 6HLW engine being defeated by a hill verifiable? 6LW engines powered 30ft long double deckers in pretty hilly territory all over the land without trouble. I can accept that the performance of the RE with the 112 bhp 6HLW might not have been sparkling, and some gradients may have required bottom gear, but I remain a trifle suspicious of the story.
Roger Cox
28/02/15 – 12:05
Yes I know what you mean Roger, but the story is told in Duncan Roberts’ ‘Bristol RE – 40 years of service’ book, which is a well-researched publication. West Yorkshire’s Bristol MW coaches (with 6HLW engines) seemed to manage trips around the Dales without too much drama, but then they had ECW aluminium-framed bodywork. I have a suspicion that Duple like Plaxton at the time, were still using composite bodies, which were quite a bit heavier. It is interesting to note that West Yorkshire’s ECW-bodied RELH6G coaches performed well on the Yorkshire-London services, with fully rated (150bhp) Gardner 6HLX engines. However, when WY’s first Plaxton-bodied RELH6G coaches arrived, within a short space of time they were deemed to be ‘sluggish’, and were re-engined with Leyland O.680 units rated at 168bhp, to improve performance. Maybe the same fate had befallen 301 – that of heavier coachwork?
Brendan Smith
01/03/15 – 06:56
Brendan, that is quite correct about the Duple bodies being composite steel/wood construction, and therefore relatively heavy. The caption to the photo in Duncan Roberts’ book, in which he related the proverbial story about the passengers having to get out and walk up an hill in Scotland, also mentions the construction of the Duple bodies. As I understand it, Duple didn’t adopt all metal frames until the advent of the Dominant. In practice, even the ECW-bodied RESLs with 6HLW engines were considered to be sluggish. Southern Vectis had a number of those, and they apparently gained a reputation for causing people to miss ferries!
Nigel Frampton
02/03/15 – 07:30
Thanks for the information on Duple bodies Nigel, and also that on Southern Vectis’ sluggish RESL6Gs. I’ve since reflected on Roger’s quite justifiable suspicion relating to the tale, and the comments on 301 in Duncan Roberts’ book. It is quite possible that the coach did struggle on the hill, and the driver did what he thought best under the circumstances. Conversely, the coach did actually manage the climb fully laden with passengers and their luggage, albeit very slowly in first gear, with the driver later commenting on its performance to colleagues on his return. No doubt it would not have taken long for the tale to “develop” as a consequence. Hmmm! We need Miss Marple on the case.
Brendan Smith
02/03/15 – 17:50
In the postwar years up to the end of the 1950s, the eight legger lorries of Atkinson, ERF, Foden and Guy, and the classic Scammell artics were all powered by the 112 bhp Gardner 6LW. Torque is the prime factor in a commercial vehicle engine, which is where the Gardner range excelled. It is worth remembering that the vaunted 125 bhp engines of AEC and Leyland developed around 118 bhp at the 1700 rpm governed speed of the 6LW, an advantage of just 6 bhp. As Ian T says in his comment on John Stringer’s post of the United Services Dennis Loline I on this site, “112 ghp (Gardner horsepower) was worth 125 of anyone else’s”. I think that the story of the 6HLW powered RE coach being totally flummoxed by a hill, like much folklore, is probably apocryphal. Turning to the matter of Duple bodywork, I personally felt that, after the neat styling of the 1950s, the Duple designs of the 1960s – the Vegas, Vistas, Viceroys et al – were uninspired in the extreme, except in respect of frontal treatment which was garishly appalling, reminiscent of the worst aesthetic abominations emanating from the car factories of Detroit. The mass of frontal metalwork alone must have added considerably to the unladen weight. Duple only partially redeemed itself with the Plaxton clones of the 1970s; the true Plaxtons still looked better. Donning my hard hat, I now await the impending onslaught from Duple aficionados.
Roger Cox
16/03/15 – 06:46
Roger, were you still in Halifax at the time the M62 was being constructed over Rishworth Moor/Moss Moor? For those not familiar with the area, between J23 and J22 the motorway passes under the B6114 in a deep cutting (the spoil from which was used to crate the embankment of Scammonden Reservoir, across which the motorway runs in a westbound direction immediately prior to the cutting). Creation of the cutting severed the B6114 and so, prior to the construction of the current over-bridge, a temporary road descending down the cutting, across the bed of the motorway, and up the other side was created (travelling westbound the tracks of the temporary road can still be seen clearly). The gradient of the temporary road was 1:5. Stay with me. In July 1968 Huddersfield JOC introduced its first two Countryside Tours: Tour B was designed to show the construction of the M62/Scammonden Reservoir/the B6114 over-bridge, and entailed buses climbing the temporary road. According to Cardno and Harling’s “Huddersfield – The Corporation Motor Bus Story”, on the first trip “Five of the seven fully-loaded single deckers failed to negotiate ‘the big dipper’ . . . the problem was caused by the flagman at the bottom of the incline whose job it was to control the traffic to ensure that heavy motorway machinery could cross the road unimpeded. he stopped the buses too close to the bottom of the incline . . .”. I remember reading, many years ago, in Julian Osborne’s “The Southdown Queen Marys”, that the pneumocyclic Queen Marys could fail to start on some of Brighton’s steeper hills, and were soon transferred away to flatter territory. Now my question is this: would the fact that the RESL had a semi-automatic gearbox have affected hill-climbing ability in comparison with Rogers 6LW-engined double-deckers? I’m assuming here that Roger’s 6LW-powered double-deckers were manual, and that the Huddersfield single-deckers concerned were (semi-automatic) Swifts/RUs/Fleetlines.
Philip Rushworth
18/03/15 – 07:09
Philip, you have raised a significant point about the hill climbing capabilities inherent in different transmission types. A friction clutch allows the driver to speed the engine a bit when pulling away on a gradient, whereas a fluid flywheel/epicyclic gearbox coupling limits the ability of the engine to rev beyond a certain level. As you say, the Southdown Leyland PD3/5s with Pneumocyclic gearboxes (dare we now call any of these full fronted Southdown PD3s “Queen Marys”?) became notorious for experiencing difficulty in pulling away from rest on steep gradients. They were relegated to flatter services and Southdown reverted to the manual transmission PD3/4 for later deliveries. However, if a fluid drive bus could get a run at a hill, allowing the engine to reach a reasonable speed before attacking the gradient, then it would go up satisfactorily. During the days of the lowest ebb of the British Leyland saga, when spare parts and new buses acquired the rarity value of hens teeth, London Country got hold of some of the ex Southdown PD3/5 machines and used them on the 409 route between Croydon and East Grinstead/Forest Row. This had some stiff gradients around the Caterham Valley, particularly Church Hill in Caterham, which has a gradient of 16%, about 1 in 6, but the approach from the bottom allowed a measure of speed to be gained before the steep ascent. These PD3/5s coped without trouble. The O600 did seem to deliver poorer torque at the bottom end of the rev range than the directly comparable AEC 9.6 litre A204/A218 and AV590 engines. The London Transport RTL was distinctly inferior on hills to the directly comparable RT. Attempts were made in 1952 and again in 1959 to allocate RTLs to the Country Bus & Coach department, but the insipid gradient performance of these machines soon led to their replacement by RTs. The Gardner 6LW was the supreme engine for low speed torque until the arrival of the 6LX, and the tale of the RE failing to tackle a hill, if true, must be put down to badly chosen gearing/rear axle ratios. In Halifax, the heavy (over 8 tons unladen) Roe bodied Daimlers of 1954 had their 6LW engines replaced by Leyland O600s, but the story is rather more complicated than one of “inadequate Gardner power”. At that time, as an economy measure, Halifax indulged in the practice of adding one part Coalene to two parts derv to propel its bus fleet. The 112 bhp K type Gardner delivered 10 bhp more at 1700 rpm than its predecessor, but it was very particular about fuel quality, and Coalene was never part of its designed diet. To add to the problem, this batch of Daimlers had 5.4:1 rear axles, rather high for the local Alpine operating territory. HPTD’s Leyland besotted new GM, Richard Le Fevre, replaced the Gardners with Leyland engines, and, under the new Asst. Engineer, a certain G.G. Hilditch, the back axles were changed to 6.2:1. The Orion bodied Daimlers kept their Patricroft power plants throughout their lives, as did the later and lighter, very fine, Roe bodied batch of 1956 (my favourite Halifax buses). The problem had not lain with the engines. Mercifully, the dubious indulgence of adding Coalene to the fuel died out in the early 1960s. I’ve driven 6LW powered Daimlers up the Halifax hills without difficulty, so the RE problem certainly lay beyond the engine, though I accept that such a coach would have been underpowered. Modern automatic bus transmissions employ a series of torque converters enabling the engine to rev freely in the starting ratio.
Roger Cox
19/03/15 – 07:14
Coalene was a product of the Coalite company, a smelly plant I recall passing near Chesterfield whenever we visited this fine town to see friends. I have a feeling that Sheffield Corporation also used it in their buses for a while. On the whole, it was only sold ‘locally’. For cars, I always fuelled up my car in Chesterfield with ICI petrol, which I never saw elsewhere, but regretted this as it was much cheaper that other brands. I assume it was a by-product of their chemical activities.
Chris Hebbron
20/03/15 – 07:24
Chris H, quite correct, the Coalite plant was at Wingerworth near Chesterfield. It covered a vast area and closed down many years ago but work still goes on there to this day, detoxifying the land.
Chris Barker
17/01/21 – 07:21
Fascinating reading and I have just read the notes on the switchback diversionary route of the B6114 between Ringstone & Dean Head. The gradient was a true 1 in 5 (20% in the new mode) and the Halifax Leopards (231-238 batch etc) needed 1st gear on both sides. This was a thrilling ride to a teenage bus enthusiast in the 1968-1971 period. Even more exciting was in icy conditions – but the bus always made it – what a contrast to today’s buses! On a Sunday afternoon, the 59 from Elland to Ripponden diverted in each direction vis Dean Head and displayed the number 58. The only regular passengers (besides me!) were 3 elderly ladies who attended the afternoon service at Dean Head Church. Very happy days – any other ageing bus enthusiasts remember travelling on this service?
Eric Sykes
18/01/21 – 05:48
This vehicle has just undergone an internal make over at IoW Museum including new floor covering and newly re-moquetted seats.
Roger Burdett
26/04/22 – 05:54
Very interesting to read of Coalene use in the 1960’s. I think it may have solved a mystery that’s puzzled me for years. As a young lad visiting relatives in Sheffield I’d always enjoy riding the buses – especially the musical AEC’s on the 75 route as they powered up to Meadowhead top. Besides thinking Sheffield blue and cream was ‘the’ best livery, I was always intrigued why Sheffield buses had a certain smell to them? It was suggested it could emanate from the furnaces of the steelworks and it somehow ‘stuck’ to the passing buses. To be honest I think very few people I spoke with at the time had ever actually noticed! I still remember the smell – which I found not unpleasant…..thanks to reading these posts I suspect Coalene sounds like the culprit!
Robert Wainman
01/05/22 – 07:34
I remember seeing this coach parked in Ventnor bus station on an island visit in around 1991; it was notably vintage even then but in showroom condition. Regarding steep hill performance, in my youth I was a daily rider on Bristol City route 3, up the steep Red Lion Hill into Knowle. Always a KSW or an older K, some Gardner 6LW, some Bristol AVW. Dependent on load, and the driver’s skill in engaging non-synchromesh bottom gear when down to walking pace, it would often fail to make it, come to a stand, and then make a spectacular hill start with much vibration and noise. Now I think of it the prospect of making a hash of it and running backwards doesn’t really bear thinking about.
On 10th February 1925 The Greyhound Motors Ltd introduced an express stage service between Bristol and London. It was apparently an immediate success despite the GWR railway between the two cities. In 1928 the company was acquired by the Bristol Tramways and Carriage Company later renamed the Bristol Omnibus Company but the Greyhound name remained in use until 1973 when it was replaced by the NBC corporate National image. A 1970 timetable recorded a total journey time of 4 and 3/4 hours for most services via Bath Chippenham Newbury and Reading which included a 15 minute comfort stop in Marlborough. The photo taken in 1972 in Marlborough shows one of the 1968 Bristol RELH6L coaches which were originally delivered in the red and cream livery and briefly repainted into white and magenta with a revised Greyhound motif.
Photograph and Copy contributed by Keith Newton
10/09/15 – 07:24
Nice view, Keith. Thank you for posting. Did any of the ‘captive’ Bristol/ECW fleets have any coaches with toilets, as Standerwick and Midland Red did? The CAPTCHA code for this comment may well set hearts afluttering in Southdown territory: 5UUF.
Pete Davies
11/09/15 – 05:37
The T-style destination on Bristol Omnibus Company’s RE coaches gave a very distinctive touch to a classic body design. The greyhound motif on the number box on this example is a nice touch.
Don McKeown
11/09/15 – 05:39
Marlborough, was also an interchange point, between Associated Motorways Services and Royal Blue with Greyhound, they had a large shop with a cafe, waiting room, and booking office in the main square. It did not appear in the time table as such, but if you phoned ahead they would hold connecting service until you arrived, passengers would be informed this would be an extra [with 10 bob being spilt between drivers, by regular passengers who knew this to be so] cheaper than a taxi. Toilets on Greyhound coaches, no, only those stationed at St Marks, which sums them up, end of life, one season at St Marks then the scrapper, if they where ok they would have been converted into DPs for Bristol and Bath.
Mike
12/09/15 – 14:34
Thank you, Mike, for your comment about toilets on these vehicles. Any thoughts, please, from anyone about the facility on coaches in other “Tilling” fleets?
Pete Davies
13/09/15 – 05:51
Pete, I’m going to stick my neck out and say “no” . . . in so far as “proper” Tilling fleets were concerned. But, THC-wise, I’m sure SOL had some Bristol RELL/Alexander Y-types (which pre-dated the M-types) fitted with toilets for its Edinburgh-London overnight services. Hang-on! didn’t Western SMT fit toilets to some of its coaches (Alexander/Guy LUFs?) to counter Northern Roadways toilet-equipped coaches on the Glasgow-London route? Where’s my Northern Roadways book . .
Philip Rushworth
13/09/15 – 05:52
Bristol Greyhound RELH6/ECW coaches to the best of my knowledge never had the luxury of toilet facilities, relying on numerous breaks at the many stop-overs on the way. On checking most other Tilling fleets with long distance coaches, even United Autos did not have them on their long distance Newcastle-London service. In fact the only ECW bodied vehicles I know of that did would be the 30 Bristol VRL/LH6L megadeckers with Standerwick used on the non-stop routes from the North West to London. The Bristol RELH6Gs used on the Edinburgh and Glasgow routes all had toilet facilities but they had Alexander M series bodies.
Ron Mesure
14/09/15 – 06:15
Toilets. Northern Roadways Burlingham coaches had toilets and refreshments on board but the 50% relief coaches did not, the hostess with big teapots would transfer over to dispense drinks and snacks often done in laybys on the A1. Passengers would have to wait until coaches pulled into top up fuel tanks for toilets, other operators had toilets but not refreshments.
Mike
15/09/15 – 06:39
Thanks for your thoughts about toilets on the “Tilling Fleets” vehicles. Much as I thought.
Pete Davies
15/09/15 – 12:29
Couple small points, pre war SMT and Western operating Anglo Scottish services had fitted toilet compartments to their Gilford AEC and Leyland Coaches; as Did Scout and Standerwick on London- Blackpool. Northern Roadways’ plans to introduce toilet accomodation on its Seagulls led to SMT and Western reintroducing the feature, initially on Alexander bodied Regal IVs, SMT then used small engined Reliances, the later ones 36ft and Western sucessively Guy Arab UF (end an eight-cylinder Albion Prototype) Guy Arab LUF, Leyland Leopard L1 and PSU3 Leopard. Then came the RELHs (not RELLs) an the the initial M Types on REMH. No Tilling fleet had a toilet fitted coach from 1945-69 but its interesting to note that United’s RELHs only sat 43, compared to the standard 47 and 51 in the Midland General semi-coaches. United were of course the only other customer than Western and Eastern for the REMH6G, taking batches between 1971 and 1973 with C49F Plaxton bodies. In NBC days Tilling had some RELH Plaxtons with toilets.
Stephen Allcroft
01/11/19 – 13:46
Much has been said (including by me!) of the sturdiness of Bristol/ECW products, but I recall a story I heard about the earliest batch of RELH6G’s delivered to United Counties (250 et seq.). It is alleged that one of them was reversing out of the strange outdoor layover bay next to the entrance to Northampton’s Derngate bus station when a mini ran into the rear overhang doing considerable structural damage! This would have been about 1970 and I recall seeing the early examples running around after that with a heavily plated repair along the waistrail behind the rear wheel. Can anyone shed any light on this? I have Duncan Roberts’ ‘Bristol RE 40 Years of Service’ but I don’t think this episode gets a mention in his excellent tome.
Brutonian Bus Company 1969 Bristol RESL6G East Lancs B47F
Bruton is a settlement on the River Brue. It is in Somerset, between Frome and Yeovil. STC 928G is a Bristol RESL6G, new to Accrington Corporation Transport in 1969. It has East Lancs B47F body and passed to Brutonian in 1982. The fleet number and Accrington livery were so near Brutonian’s requirements that neither was changed. The operator became part of the Cawlett Group and is now part of First. We see the bus parked in New Canal, Salisbury, on 17 April 1984, having come in on a market service.
Photograph and Copy contributed by Pete Davies
19/02/17 – 16:22
4 vehicles were acquired by Brutonian in 1982 from Hyndburn as successor to Accrington CTD. The vehicles were reliable and popular and the livery was retained and looked attractive as can be seen from Pete’s photo in Salisbury. None were ever repainted and by 1987 the livery had deteriorated as can be seen from the attached taken in Dorchester.
Keith and Keith, Your photos suggest that this vehicle was on its way to a breaker, rather than in service. Given what became of Brutonian, one might wonder if it’s a ‘practice’ for the Barbie livery!
Pete Davies
20/02/17 – 13:26
Perhaps we should have a section for the worst presented buses- “battered buses”? Even on the original photo, you can see the untreated deterioration around the “peak” and front wheel arch. The grille was starting to go on the first pic, and then… Brutal!
Joe
21/02/17 – 07:06
How could a vehicle so neglected be allowed to operate? What about the vehicle examiners and the traffic commissioners? I don’t think I have ever seen a bus operating in such a sad state, and the final shot was hopefully before scrapping – it would have been a mercy killing. Brutonian, with the emphasis on the ‘brute’. Thank goodness for operators like Safeguard at Guildford.
David Wragg
21/02/17 – 16:15
David, I agree with what you say about the appearance, but the condition of the paintwork is not a criteria for a vehicle test. However, the body is, so presumably it must have been up to standard or it would not have been granted a C.O.F. There is of course the reverse of the coin that a coat of paint hides a multitude of sins
Ronnie Hoye
21/02/17 – 16:16
To be fair – maybe – things were different then in particular the powers that be were more concerned with de-regulation and local authorities had to ensure non-commercial services would continue. The owner of Brutonian had agreed to sell to a local businessman whose interests included a travel agency and the transfer was delayed until de-reg ie end of October 1986. As well as existing routes and new commercial ones , the new company had gained additional tenders – not least the trunk route 6 between Sherborne and Dorchester. Despite the poor external appearances , the REs were apparently mechanically sound and reliable and the additional work probably extended their lives. Unfortunately the 6 passed County Hall and comments were apparently made therein !! No 28 was withdrawn soon after the photo was taken and continued concern saw the tender itself subsequently transferred the following year to another local operator.
Attached is another photo taken in May 1985 in Castle Cary on the Saturday evening Bingo service and is probably how these fine vehicles should be remembered. A new book on Brutonian concentrating on the routes and operations is to be published soon through the Omnibus Society.
Keith Newton
22/02/17 – 07:11
I think ‘the ugly face of de-regulation’ is a term that sums up this situation. A similar thing happened in the North West where the once proud Yelloway having been asset stripped by new owners secured a tendered service into Manchester formerly run by the PTE. They used very unsavoury looking cast-off Bristol VRT/ECW vehicles in worn out ex NBC liveries with no fleetnames and paper stickers in the windscreens as a destination display. It was a disgrace. Fortunately the powers that be stepped in fairly quickly and terminated the arrangement with the service being re-tendered. Not the British bus industry’s finest hour.
Philip Halstead
22/02/17 – 07:12
I have read that Brutonian only repainted vehicles when they were in for other maintenance, resulting in the most unreliable ones being repainted first and vice versa. So looking at the state of this one, Keith’s comment about its mechanical soundness rings true!
Peter Williamson
27/02/17 – 07:49
Chris Knubley the owner of Brutonian never really had much money. There was an injection of money into the business in 79 when he bought his first RE (GAX 5C – a great bus!) and CYA 181J (survices) along with WYD 928H from H&C, the latter was never painted. Generally the most reliable buses were painted 217 UYC and 497 ALH for example, while others ran in a range of former operators colours 8087 TE and TET 166, for example. Not creating consistency was something he had done from 1972! There was clearly something wrong with the last paint job done by Hyndburn on MTJ 926/927G and STC 928/928G. Alternatively the guy who replaced me washing them down from Sep 82 was using the pressure washer incorrectly, or it had been inadvertently fitted with the sandblasting nozzle! 27 became the donor to the others although lasted until a few years ago along with 26 and 29 in Shobdon before final scrapping. 28, in the picture, I understand was in fact the most reliable and went onto be repainted and see further service with Metrowest (the only one of the four). It was indeed different times…I now own the only bus to carry the Brutonian colours which is OVL494, an identical bus to Brutonian’s OVL 495, which was scrapped after an attempt to convert it to a half cab. All other survivors are in original operator colours or in CYA 181J’s case, awaiting restoration.
Paul Welling
08/10/17 – 08:04
Yes deregulation did the bus industry no favours and we are still seeing the repercussions over 30 years later. Fishwick’s and Pennine spring to mind.
North Western Road Car 1968 Bristol RESL6G Marshall B45F
In its final years, North Western chose the Bristol RE as its standard single deck bus chassis, initially selecting the shorter RESL6G version in 1968 before turning to the longer RELL6G variety from 1969 onwards. The RESL6G saloons numbered forty in total and all came with Marshall bodywork, the first fifteen, Nos 270-284, KJA 270-284F, arriving in January 1968 as B45F. However, Nos 285-309, KJA 285-289F, KJA 290- 309G delivered from July 1968 onwards, had the reduced capacity of B43F. On 1st January 1969 SELNEC PTE was formed, and much of the North Western stage carriage network lay within the designated SELNEC area. After lengthy negotiations, the National Bus Company conceded, and the hatchet finally fell upon North Western in January 1972 when its bus fleet was dismembered, leaving NWRCC as simply a coach operator. Most of the RESL/Marshall buses, including No 282 shown above, passed to SELNEC, but Nos 302 -309 were transferred to Crosville. I am sure that our Lancastrian contributors will be able to tell me the Manchester location of the photograph which was taken in June 1970. One final question – did these buses have Gardner LW or LX engines?
Photograph and Copy contributed by Roger Cox
18/11/18 – 10:41
This is unmistakably in St. Peter’s Square in Manchester and would have to be a tram to make such a manoeuvre now! 282 was one of the batch allocated to Oldham depot and was new in a livery that also had cream window surrounds and, distinctively, cream inside the peaks of the domes as can be seen on sister 281 here: https://davidbeilby Although 281 survived long enough to get the SELNEC Cheshire fleetname as seen in the linked photo, 282 was repainted earlier as I have a picture of it in October 1970 in the above colour scheme. In your photo it seems to be newly-painted. As it’s showing “PRIVATE” it doesn’t give much clue as to why it would be there and it may well be working from Manchester to Oldham depots after having been borrowed. It is also just possible, if it is a morning photograph, that it is returning from working the solitary morning peak journey from Mottram to Manchester Lower Mosley Street that was worked by Oldham – it worked out of service from Manchester back to Oldham depot.
David Beilby
[Administrator note: The link to David’s site, in the above message, is no longer current. If you read this David, please let me know the updated address and I will update this page. Thanks, Nigel (admin)]
20/11/18 – 09:11
It’s not early morning, David. At that point in my life I lived in Farnborough, Hampshire. I would catch an early train from London to undertake my Manchester transport jaunts, so it would be around midday or early afternoon.
Roger Cox
24/11/18 – 06:21
Well, at long last the NWRCC finally got its Bristols once again after more than 20 years. The Central Library in the background of the photo looks far more impressive nowadays now it has been cleaned of all the grime that had accumulated prior to the Clean Air Act. I still have fond memories of the Library: there were many Saturday afternoons I would spend valuable learning time reading Buses Illustrated and Modern Tramway.
David Revis
24/11/18 – 09:56
North Western received its last Bristols, ordered prior to the effect of the nationalisation of Bristol, in late 1950 these being L5Gs 311-32 EDB 311-320 with Weymann B35R bodies. The RESL6Gs were delivered from January 1968, thus the wait for new Bristols was just 17 years, not over 20. Central Library was cleaned in 1971.
Phil Blinkhorn
25/11/18 – 06:51
The photo was taken in June 1970 and the bus looks freshly repainted. Could that explain why it is where it is? Would it have been repainted in Manchester?
Peter Williamson
15/04/19 – 07:13
To answer the question on engines, they had Gardner 6HLX engines. I have close personal experience of this, being the owner of the surviving member of the batch 299! For obvious reasons I’ve collected a lot of photos of this batch, and I’ve found that quite a few were repainted from the “more cream” style to the one we see here when quite young. My speculation (no more than that) is that the Marshall paint job wasn’t especially good, these bodies being built down to a price, and North Western gave them a repaint in the by-then current style when only about three years old. To answer Peter Williamson’s question, it’s almost certain that it would have been repainted at the company‘s Works at Charles Street in Stockport and could – conceivably – have been photographed on its way back to Oldham from the repaint.
Paul Williams
16/04/19 – 09:00
Travelling from Charles St to Oldham via St Peter’s Sq is a long way round. In 1970 the shortest route would have been Charles St-Bredbury-Denton-Ashton-Oldham. Roger says the photo was taken mid day or early afternoon. There are a number of possibilities. David Beilby’s first suggestion; as we can’t determine the driver, some sort of engineer’s run though why go into Manchester?; if this was a Saturday (the lights are on in the library, so not a Sunday), returning from a private hire where the vehicle is not required for a return run, such as taking people from the Oldham area to an event at the close by Free Trade Hall that runs until late evening or returning from delivering people who have been visiting the Oldham area to wherever. Again, it could have run into Manchester as a duplicate on a trans Pennine service and was not required beyond Lower Mosley St or on the return. We’ll never know
Phil Blinkhorn
26/04/19 – 09:44
My own theory on why the bus is in Manchester is that having come out of the paintshop the driver may have been asked to deliver some urgent mail to Lower Mosley Street. It was common practice to send mail on service buses between depots. Oldham Depot only had two AM journeys that returned private back to Oldham. The first was a mentioned by David Beilby. The number 6 duplicate from Mottram. The other journey worked the service 503 from Adswood into the City. Prior to this journey it worked a journey from Ashton-under-Lyne to Hazel Grove (Mirrlees Works). Just a thought.
Keith Hampton
27/04/19 – 13:24
My father was one of the 116 workers entitled to use this service from the newly closed Ashton National Works to Mirrlees. At least in the early days this must have required 2 buses, perhaps one for works and a later one for offices. I presume the service ended at some point after most of the entitled moved or bought cars. Do you know how the return journey late afternoon was organised?
Tony Johnson
28/04/19 – 08:06
Thanks for explaining the origins of this Mirrlees works service. It’s pretty obvious now you mention it but not something I had thought about too much before. There were two morning journeys from the information I have (which I think is the same that Keith Hampton has). It seems logical that there was an afternoon return service but this does not appear in the Oldham depot schedules, so one concludes it was worked by someone else. Either another North Western depot or another operator (jointly).
David Beilby
03/05/19 – 07:11
Tony Johnson mentions that at least 2 vehicles must have been required for this service. I can confirm that this was the case, and both journeys were worked by Oldham Garage. According to my list of Oldham duties:- One Double Decker (Crew duty 23) departed Ashton Bus Station at 07:05, and a Single Decker (OMO duty 29) at 07:50. On arrival at Mirrlees both buses then operated from Adswood to Chorlton Street. Would it have been the case, do you think, that these 2 Adswood journeys would have operated to Lower Mosley Street before the closure of LMS? If that was the case then 282 was possibly heading back to Oldham after completing it work. There is no mention of PM journeys from Mirrlees in the Oldham duties.
Stephen Howarth
04/05/19 – 06:31
Stephen, the use of LMS is a distinct possibility.
Phil Blinkhorn
04/05/19 – 06:32
Unfortunately, Stephen, Roger has already pointed out that he would not have been in Manchester early enough for that to be the case. I think that there were afternoon journeys but not worked by Oldham. I have a photograph of 932 on this service in April 1972 and that wasn’t an Oldham car at the time, but I don’t know to which depot it was allocated. It’s more likely to be an afternoon shot but I don’t actually know.
Western National Omnibus Co Ltd 1967 Bedford VAM 5 ECW B45F
The last Bristol MW’s entered service in May 1967, and the first LH’s in June 1968. In the interim, Western National placed in service a batch of twelve Bedford VAM 5 with Eastern Coachworks bus bodywork. These were numbered 701-712 (KDV 131 -142F). The body design was clearly based on the standard design which had been produced in large numbers for the Bristol MW model, but with a more modern front end grafted onto it. The VAM 5 model had the small Bedford 330 cu in engine and a four speed gearbox. The batch led a full service life of at least twelve years; Latterly the last six of the batch were allocated to Newquay Depot, and could regularly be found working the scenic and hilly route 573 from Newquay to St. Columb Minor, which followed the coast for a few miles before turning inland. Here we see one of the batch negotiating a hairpin bend just west of Watergate bay. West Yorkshire also had four Bedford VAM with this style of ECW body, but the West Yorkshire examples were type VAM 14, with the Leyland 400 engine and a five speed gearbox. The West Yorkshire batch had a very short operational life. I believe that Eastern Counties also had some of these interesting vehicles.
Photograph and Copy contributed by Don McKeown
22/10/14 – 18:20
Eastern Counties did have some of these ECW bodied Bedfords one was sold to Primrose Valley of Hunmanby. I rode on it from Filey to Reighton Gap and I have to say never had I been on a more vibration prone vehicle. Although having now had a ride on a preserved Bristol SC!
Chris Hough
23/10/14 – 07:04
I always considered these to be fascinating and businesslike vehicles, combining the classic “no nonsense” ECW lines with a most worthy lightweight chassis. I’ve always had a very soft spot for Bedford “no nonsense” honest and well performing vehicles, and if any vibration was felt look on the bright side Chris – therapeutic vibro massage included free !!
Chris Youhill
24/10/14 – 07:28
I remember encountering these beasts at Dartmouth in the early ’70s. With the benefit of hindsight (as well as driving later examples) I would hazard the opinion that the zenith of Bedford’s existence was with their petrol models. With due deference to Chris, I would say that Bedford diesels were a poor substitute and my operator friend concurs that the VAM5s he operated with Eastern Scottish were a nightmare and grossly underpowered. Likewise, Ribble got rid of its small number of VAM5s after an indecently short time. While the 466 and 500 diesels were a great improvement, there is a general consensus that the VAL14 and VAM14 (Leyland O400) were far better than the VAL70 and VAM70 (Bedford 466). Which makes the short operational lives of West Yorkshire’s VAM14s all the more strange.
David Oldfield
24/10/14 – 18:23
I don’t remember these when growing up in Taunton but I’ve asked for more information from Colin Billington who says “The early ones (700-703) were allocated to Plymouth often passing through Kingsbridge on the 93 route. Don has the numbering wrong, They were 700-711 (KDV 130-141F) not 701-12. 712 was a LH. Noisy things with the engine next to the driver”
Ken Jones
04/03/16 – 06:45
Don is correct. ECOC had four VAMs with ECW bodies: 2 X Bedford engines and 2 X Leyland engines! SB663 (NAH 663F), with Leyland engine, is seen leaving Norwich Thorpe Railway Station on Sunday May 12, 1968 when it was one of at least 10 new shiny ECOC vehicles (not one displaying any side adverts) taking passengers from the Flying Scotsman excursion on a variety of tours. As delivered, the driver access to the cab was by squeezing between the partial screen behind the driver’s seat and the offside body side. I had them rebuilt so you walked over a more substantial engine cover incorporating the ticket machine mounting. The point to comparing the two engines was a bit academic as NBC bought no more bus versions!
Geoff Pullin
18/10/16 – 07:53
NAH 661/2F had Bedford 330 engines and were VAM5. NAH 663/4F had Leyland 400 engines and were VAM14.
Steve Paine
22/05/21 – 06:37
I help to look after a Leyland 400 powered Bedford VAM in New Zealand. It is reliable but seems quite under-powered. It is certainly quite loud from the drivers seat, and enough vibration to keep things interesting. Ours has a high speed diff but a conventional (not overdrive) gearbox. The previous comments about these buses is really interesting, thank you.
Eastern Counties Omnibus Co Ltd 1967 Bristol RESL 6HLX ECW B46F
There are several non-ECW bodied RE buses featured on this site but few if any of the first Tilling Group RESL standard bus. This is RS660 (KVF 660E), the last of a batch of 14, which I believe was supplied to meet an outstanding order for MWs. The fact that they had 46 seats, compared to the maximum of 45 to date, didn’t prevent them being accepted immediately for one man operation, several based at the many outstations for which the company was famous. Alongside are FLF359 (ONG 359F) and SB664 (NAH 664F). A large number of recent deliveries, which the advert fixers had yet to purloin, were assembled in the forecourt of Thorpe Station, Norwich on Sunday, May 12, 1968 to meet an excursion train hauled by the Flying Scotsman. There were several tour options for passengers around the city and county before the return journey.
This period saw Eastern Counties explode from its long 4 and 5 cylinder era into that of the 6LX and 6HLX! The FLF found its way to Western SMT a couple of years later in the great FLF for VRT swop between National Bus Company and the Scottish Bus Group. The Bedford with ECW bus body was one of a batch of four, two with Bedford engines and this and SB663 (already shown on the same day in a Bedford VAM string in OBP) had Leyland engines.
Photograph and Copy contributed by Geoff Pullin
23/12/19 – 06:45
I believe that Eastern Counties’ next batch of RE buses were RELLs, and these were supplied with 6HLW engines, which were quickly swapped with the 6HLX engines from the RESLs.
Nigel Frampton
23/12/19 – 06:47
We had two Bristol RS’s at Cambridge. One of them was almost permanently on route 428 Cambridge station to Bedford. It was a long duty….two journeys….and was the only week on the rota that had two rest days for that reason. I worked it for a week when the regular driver was on holiday and enjoyed it immensely. The RS’s were super to drive…fast and powerful, and although they were rear engined, they had a very precise manual gear change, and a long gear lever. I also recall that they had a high pitched whine at speed from the transmission. The other RS was usually on the 113 Cambridge to Haverhill and Kedington services, so they could inter change for maintenance and repairs. The RS’s were a vast improvement on the ordinary Bristol MW’s.
Norman Long
24/12/19 – 07:37
Nigel, I don’t think this is true. The first RELLs were in service in June 1968 (the month after the above photo) and I’m sure they had 6HLX engines as well. Although the company was adept at physically changing types of engine after years of downsizing double decks to 5 cylinders and much later installing a Gardner into a Leyland National, the change to 6HLX from 5HLW for buses was the policy introduced by the new General Manager who had arrived from Eastern National. In the 1960s, it was company policy to ‘fairly’ share new vehicles across the whole vast area, so, unlike today, sadly the advantages of better vehicles and performance didn’t reflect into timetables!
Geoff Pullin
24/12/19 – 10:05
The FLF would have had a 6LX engine also, although retaining a manual gearbox. All EC’s previous batches of FLFs having 6LWs.The former BCV test vehicle which they acquired in 1967 may have had a Bristol BVW initially.
Brian Crowther
25/12/19 – 05:52
Geoff, I must admit that I cannot remember exactly where I read about the engine swap – I think that it was in “Buses” magazine. However, the page on Rob Sly’s website for KVF 658E (the preserved survivor from this batch of RESLs) says that the engine was swapped during 1969. //bcv.robsly.com/kvf658e.html Other online sources say that it now has a 6HLX, so presumably it was changed again (or never changed at all!)
Nigel Frampton
25/12/19 – 05:53
Think the RESL at Carlton Colville has a 6HLW.
Roger Burdett
26/12/19 – 06:15
Nigel is correct, the 14 RESL’s 647 to 660 were delivered with 6HLX engines which were later replaced with 6HLW’s from RELL’s but without checking back I can’t confirm which RELL’s were delivered with 6HLW’s. I thought they may have been replaced with a later batch but as the first 14 RELL’s RL665 to 678 all had PPW registrations it’s possible that they were the donors.
Mark Ellis
28/12/19 – 06:18
Is the Bedford missing it’s front grille? It seems we are looking directly at the radiator without anything covering it.
Chris Barker
28/12/19 – 09:20
Looking at various photos of the four Bedfords in the batch SB661-664 (NAH 661-664F), the grille format appears the same on them all even after sale to other operators. As Chris B says it does look very much like the grille is missing. Looking at photographs of the examples operated by West Yorkshire (4) and Western National (12), also new in 1967, all those seem to have more obvious grilles.
David Slater
28/12/19 – 15:10
This photo, taken on the same occasion, shows SB663 is fitted with a manually adjusted radiator blind in the traditional Bristol on-radiator fashion.
I don’t remember if this was ECW standard or an ECOC special.
In the close-up shot it would appear that the grille on the VAM has been set back from the front panel to allow for the fitting of a radiator blind. Whether this was fitted “in build” by ECW at Lowestoft, or done by Eastern Counties themselves I’ll leave it to the ECOC experts.
Brendan Smith
18/02/20 – 07:30
The RELLs with 6HLW units were RL703-7 and 710-8 from the 1969 order, the engines being exchanged at ECOC before the chassis headed to ECW for bodying. KVF 658E regained a 6HLX after entering preservation. To tidy up, test rig FLF LAH 448E was ECOC’s only Bristol-engined example and was converted to 6LW in 1971. I’ve long wondered why the six FLs delivered in 1962/63 had BVWs while the double-deck fleet was entirely Gardner by then. Apart from one which was withdrawn early in 1976, the others again all received 6LWs.
United Automobile Services 1967 Bristol RELH6G ECW C43F
United had a small Garage at Pickering where the forecourt doubled up as a Bus Station. Here 4343 (originally RE43) is loading for a trip along the A170 seventeen miles to Scarborough. I expect this vehicle retained its manual gearbox which I would think could be tricky on a Stage Service. It is a good looking bus/coach – shame about the livery!
Photograph and Copy contributed by Ian Wild
12/05/20 – 06:48
Are you sure it had the manual gearbox? Crosville’s E registered RELH6Gs had semi automatic boxes. Even in bus livery, these coaches looked beautiful!
Don McKeown
13/05/20 – 07:03
Probably was semi automatic. West Yorkshire’s E registered RELH were as well. As regards manual boxes I remember some West Yorkshire drivers struggling with earlier B, C, and D registered RELL buses.
Stephen Clough
14/05/20 – 06:52
According to United Automobile Services Part Two by messrs. Townsin, Groves and Banks (Venture Publications), this batch RE41-65 were the first coaches to be delivered with semi-automatic gearboxes.
John Gibson
16/05/20 – 06:33
It might be 17 miles from Pickering to Scarborough, but three times a day (twice on Sundays) the route began in Ripon, via Thirsk, Ampleforth and Helmsley to Pickering and Scarborough, distance of some 60+ miles, some of it on minor roads. In 1976 this took around three and a half hour end to end. The route number groups with other Ripon services, but how it was crewed is a mystery to me. I guess Ripon crews were relieved for a break at Pickering, as two of the through journeys had only five minutes turn round at Scarborough. I would be very interested to know more about the operation of the 128.
Andy Buckland
17/05/20 – 06:37
Andy’s comment reminded me that in the James Herriot book “Vets might fly” James bunked off from his RAF training in Scarborough one Sunday afternoon and travelled by bus to “Darrowby” (which we now know to be Thirsk) to see his pregnant wife, Helen. He had less than an hour before he had to catch the return bus – and as I recall it, his absence without leave was never detected! I assume that this escapade, like many others, was founded in real life.
Stephen Ford
18/05/20 – 06:34
Stephen, by 1976, the date of my timetable, this would not be possible on a Sunday, with just two through journeys each way. You had to leave Scarborough at 10:45 to reach Thirsk by 13:35, returning at 18:10. Now, if in earlier years there had been a third return, as during the week, then 12:45 from Scarborough, arrive Thirsk 15:40, return at 18:27 was possible. Add a bit of poetic licence and we perhaps have the basis for the story.
Andy Buckland
20/05/20 – 07:18
I have been looking at the summer timetable for 1957, and it shows that from 7th July to 14th September, there were three journeys each way between Scarborough and Ripon on Sundays. If he left Scarborough at 10.45, he would reach Thirsk at 1.40 p.m. He could then leave Thirsk at 3.50 p.m. arriving back at Scarborough at 6.40 p.m. So yes, this journey would have been feasible as long as it was made at the height of the summer.
John Gibson
20/05/20 – 07:19
I travelled on service 128 from Helmsley to Ripon in 1976 (MWs all the way from Middlesbrough to Harrogate!!). If memory isn’t playing tricks, we had to change buses at Sproxton, west of Helmsley, and the respective buses then returned home. I can’t remember if the change was advertised in the timetable. A trip form Ross-on-Wye to Abergavenny by Red and White in 1970 (MWs again) certainly involved a change at Broad Oak even though the timetable showed the buses working through.
Phil Drake
21/05/20 – 06:56
And there we have the answer, Phil! Certainly there is no reference to a change of vehicle at Sproxton, indeed it does not even merit entry in the timetable, but if you look at the times for Helmsley and Ampleforth, then buses would cross roughly where Sproxton is. What makes it strange is that Sproxton is only a few minutes west of Helmsley, where some journeys stood time and interchange facilities are much better. Was there perhaps some unwritten rule that Helmsley to Scarborough was dedicated to Pickering/Scarborough drivers and Ripon was “another company”.
Andy Buckland
21/05/20 – 06:56
Definitely semi-auto, we had 4344 at Darlington for a while, not the fastest, comfortable for both driver and passengers it did what it was supposed to do. I used to call it the old mans bus.
John Wake
31/08/20 – 06:27
Regarding the operation of the Ripon to Scarborough service, I lived in Ripon in the late 1960s, and at that time the buses definitely worked through on the whole route, but the drivers did not. When opposing vehicles met, usually in the middle of nowhere, they stopped and the drivers changed over, returning whence they had come from. I presume that with three services each way on weekdays, a Scarborough based vehicle would spend alternate nights at Ripon garage, and vice versa. Obvious the drivers would get back home at the end of their shifts.
Chris Appleby
03/09/20 – 06:18
Where the garage was may be seen here: https://www.google.co.uk/maps/ It would appear that the property was modified to become the carpet showroom it is in the photograph. I have a snapshot photograph I took on Sunday 23 July 1972 which has four single deckers parked within. //www.ipernity.com/
Crosville – Bristol RESL6G – OFM 2E – ERG 2 Crosville Motor Services Ltd 1967 Bristol RESL6G ECW DP42F
Crosville was the first to operate the then latest version of the Bristol RESL with shortened wheelbase and extended front overhang giving a wider entrance door arrangement. These were also the first with this design of ECW body characterised by the shallow flat windscreens. Crosville put this batch of six into service in July 1967 on the long Rail Replacement service D94 between Wrexham and Barmouth. This served a sparsely populated area with Llangollen, Corwen, Bala and Dolgellau as the intermediate towns of any size. These six were synonymous with this route for many years but here in 1977 is ERG 2 in NBC days crossing the Cambrian Coast Railway line at Fairbourne on the S28 Tywyn to Dolgellau route. The NBC “Local Coach” version of the leaf green livery with white upperworks looks pretty smart.
Photograph and Copy contributed by Ian Wild
10/07/20 – 06:14
I think these were the only dual purpose RESLs in the THC group of companies, although Midland General famously had two RESHs. Some of these vehicles were used elsewhere when brand new; ERG 2 was new to Llandudno Junction, and ERG 3 and 4 were at Caernarfon, although they soon migrated to the D94. Around 1974, A longer example, ERG 272 was transferred to Dolgellau Depot for use on the D94, and ERG2 was then used on other services from Dolgellau as shown here. When new, these vehicles were painted cream with a green waistband, and they looked superb in that livery. ERG 3 is magnificently preserved in that livery.
Don McKeown
10/07/20 – 06:16
As far as the shorter length RE was concerned, the RESL seems to have been the almost universal choice for bus work but I wonder about it’s merits for dual purpose use, particularly if some of the front seats faced sideways. However, Crosville seemed to like them and as Ian says, used them on some long services although I’m not too sure about the prospect of sitting rather low down or sideways at the front for perhaps a couple of hours or so. Midland General had a couple of short REs with this type of body but on the RESH chassis, with 43 dual purpose seats, all facing forward. Surprisingly, I believe they were the only ones bodied by ECW.
Chris Barker
16/07/20 – 10:16
United used the long version of the dual purpose RE on the five and a half hour 505 Newcastle to Edinburgh via Berwick service – not to my mind the most suitable of vehicles, and the seats were not especially comfortable. The route was jointly operated by Eastern Scottish who used Leyland Leopards and AEC Reliances with Alexander Y Type coach bodies. These were much more comfortable to ride on and seemed better suited to the route, although with the disadvantage of high entrance steps. The RELLs would be replaced after a few years by dual purpose RELHs with all forward facing seats and they in turn were replaced by downgraded RELH coaches, originally used on the Newcastle to London service. They would I suppose have been about ten years old then, but were still superb vehicle to travel on, however by that time, the service was being operated in two parts with passengers required to change vehicles at Berwick.
Eastern Scottish 1966 Bristol RELH6G Alexander C38F
Seen on layover in London are three of the Alexander C38F bodied Bristol RELH6G coaches operated by Eastern Scottish from a batch totalling 33 vehicles of the type delivered in 1966. These toilet equipped coaches brought a new level of refinement to the lengthy journey between the Capital and Caledonia for several years. In this picture, none of the vehicles is carrying the “Bristol RE” nameplate on the radiator grille which they certainly wore at another time in their lives.
Photograph and Copy contributed by Roger Cox
11/07/22 – 06:02
Just to clarify, the vehicles from left to right are EWS 166D, EWS 193D and EWS 190D, with matching fleet numbers XA166/193/190 A.
Roger Cox
11/07/22 – 06:03
I could be wrong on this ‘I frequently am’ but I’m pretty sure that the services to Scotland, i.e. Edinburgh, Glasgow and Inverness, were all overnight only. Unlike the United Tyne Tees Thames, which was twice a day. 8am and pm if memory serves.
Ronnie Hoye
12/07/22 – 05:43
Eastern Scottish did operate daytime services between London and Edinburgh, per my photo herewith.
Richard Slater
13/07/22 – 06:15
Thanks for that, Richard. I did say that I was frequently wrong. The location looks to be the start of the Tyne Bridge, heading north towards Newcastle. The bus facing us, is probably a Gateshead & District Alexander ‘A’ type bodied Leyland Atlantean, and the one to the left is a Newcastle Corporation, or possibly by that time a PTA turning to go towards Gateshead Station. Bit hard to tell, but my guess would be a P/R bodied MkV AEC Regent.
Ronnie Hoye
13/07/22 – 06:16
I think you’ll find that you are both correct. Eastern Scottish called the daytime services “Tours” – as they took 2/3 days to do the journey with overnight stops.
David Oldfield
14/07/22 – 06:01
The Summer 1969 ABC Bus and coach guide shows conventional daytime journeys on both routes (Edinburgh and Glasgow), which completed the journeys within the same day. As far as I know, the 2/3 day tours were only operated by Eastern Scottish. Departure was at 08:00 from both ends, on both routes.
Nigel Frampton
15/07/22 – 06:05
Memory tells me that, in my student days in Birmingham, the Standerwicks would move out of the fast lane only for blue lights and the Scottish coaches, and I think they were usually Western, rather than Eastern, on the M6.
Pete Davies
16/07/22 – 06:24
Speaking as a retired LGV Instructor, Pete, I can tell you quite categorically that there is no such thing as the ‘Fast Lane’ on UK Motorways. You drive on the left, unless overtaking
Ronnie Hoye
17/07/22 – 06:29
Ronnie: Unfortunately regardless of how many times broadcasters have been told by me and others to stop using “Fast Lane” in traffic reports they will persist and thus those like Pete perpetuate it in everyday usage. I remember once climbing the M6 southbound from Penrith towards Shap Summit and there were 3 coaches from different companies (Well different liveries anyway) having a 3 mile drag race up the gradient.
