OHR 919 is a Bristol LD6G with ECW H60RD body, new to Wilts & Dorset in 1956. In October 1972, under NBC direction, Wilts & Dorset was absorbed into the neighbouring Hants & Dorset, with both fleets adopting the (poppy) red livery. After withdrawal from normal service, it was converted for use as a driver training vehicle, in yellow livery.
There is, however, such a thing as life after the ancillary fleet, and we see it, and the original style of fleetname in the Netley rally on 8 June 2008.
Photograph and Copy contributed by Pete Davies
08/12/16 – 06:03
A lovely example of an LD Lodekka looking its best and unsullied by CBC between decks radiators. This was my favourite style of ECW body on the LD, having the sloping edge to the canopy (mirrored on the offside by the lower edge of the cream band above the cab), push out vents to the front upper deck windows, upper deck cream band carried around the front, horizontal bottom edge to the cab door window, and the ‘whiskers’ above the radiator grille. Just wonderful. Wilts & Dorset 628 reminds me very much of West Yorkshire’s DX44-58 (RWY822-836) delivered in 1956/57. The sound effects were different to 628’s however, as they were LD6Bs with Bristol AVW engines, apart from DX48 (RWY826) which was fitted with a Gardner 6LX engine by West Yorkshire in 1958. A minor point of interest is that 628 appears to have acquired an early F-Series Lodekka cowl at some point. The giveaway is the registration plate, which is offset to the offside in order to accommodate the elongated hole for the revised step for crews to access the destination winding handles. The LD cowls had a centrally-mounted registration plate with a smaller hole and step either side of it. This minor detail does not detract from the appearance of this beautiful vehicle whatsoever. It’s a credit to its owner.
Brendan Smith
08/12/16 – 06:04
Lovely photo, Pete. How nice to see a Lodekka in a rich red colour, rather than the green that pervaded most of these vehicles.
Chris Hebbron
08/12/16 – 08:37
Thank you, Brendan & Chris. I suppose the red, being the standard Tilling, was the same shade as Brighton Hove & District, Cumberland, United, West Yorkshire and one or two more. Certainly more “distinguished” than what followed in NBC days!
Pete Davies
08/12/16 – 09:28
I’m sure that the Wilts & Dorset Tilling red was the same as applied to Cumberland, United, West Yorkshire, as mentioned above by Pete. I’m not so sure that the Brighton Hove & District red was the same. Although it was a Tilling company, the livery was the same as that applied to Brighton Corporation. The different application of the amount of cream (that DOES look a different shade to the others) for that fleet makes the red look a different shade – but this may be a deception. Perhaps someone has a factual knowledge.
Michael Hampton
10/12/16 – 06:37
If United buses weren’t this shade of red, they were only a kick in the proverbial off it. I don’t know about Wilts and Dorset, but round about the mid 60’s, United changed the wheel colour to red. Only a handful of VR’s were ever in the traditional United livery, but the upper cream band had disappeared.
Ronnie Hoye
10/12/16 – 10:17
Thank you, Michael & Ronnie.
Pete Davies
14/12/16 – 15:40
Lodekkas by Colour Dear Chris, I wondered at your statement that green Lodekkas were in the majority, so I looked through the production table in Martin Curtis’ excellent book. Of the 25 fleets in BTC “Tilling Group”/|THC ownership that took new Lodekkas, 13 were green; if by the time of the delivery of Westcliff on Sea’s six they wore the same livery as their parent company Eastern National. Thus 11 of the BET/ THC fleets were not green. Two (Midland General/ Notts & Derby) being blue and the others red or (Cheltenham District) maroon. Within the Scottish Omnibuses group only one fleet took green Lodekkas new, with two using blue and the rest varied shades of red and maroon. That equates to fourteen green fleets and seventeen not green. Note this is based on data as new, with one FLF going to Bristol Commercial Vehicles experimental Department, and this was also red. However, when the figures are totalled for “green” Lodekkas, you are vindicated in that “green” fleets took 2945 and not-green fleets took 2271 (plus one new as a manufacturer’s test bed, giving 2272). That is 56 per cent to forty four. My perception was skewed by living in the East Midlands when Lodekkas were in service and holidaying with either mother’s family in Norfolk or father’s in Northumberland… Of the fleets taking the most Lodekkas, first was Crosville with 539, then Bristol OC (including Gloucester, Bath Services and Bath Tramways) with 539. Of course some of Crosville’s were new in cream with black relief, but less than fifty if my guess is right. (I could re- read the whole book now but that seems excessive when I promised Wikipedia a Guy Arab article around a year ago and it just needs citations to finish.) Eastern National was third with 381, with if memory serves 25 new in mainly cream, so even if we had a recount on that basis it would still be a Brexit sort of majority, rather less than the Scottish Indyref style one the raw figures give. Of course my electoral college would give the result to not-green. Fourth was Central SMT who took 355, initially LD6Gs then FSF6Gs, FLF6Gs FS6Gs and from 1965-67 FLF6LX’s; of the three Lodekkas at Glasgow Vintage Vehicle Trust’s Bridgeton Bus Garage, two are ex-Central a 1957 LD6G and a 1968 FLF6LX. Now of the shades of red used for new deliveries, Central it seems had the darkest, but it may have been the same as Cheltenham District and almost certainly David Lawson. Western, Alexander (Perth City and Kirkcaldy Town services) and Highland (second-hand) had Scottish Bus red which was darker than Tilling red. It may be the greater areas of cream but I think Brighton Hove and District did use a brighter shade of red than ‘Tilling’ red; maybe perversely, this was actually the same red used by Thomas Tilling in Brighton and (pre-LPTB) London. The brightest red on new Lodekkas was that used by Alexander (Fife) after the split of Alexander into three in 1961. The shade was Ayres red, the same as British Road Services used. (In a former home I was able to sell Fife FRD 187 (BXA 452B) from its non-PSV use to preservationists who have restored it.) I do not think that Thames Valley had any of their Lodekkas delivered in the maroon and cream coach livery although some were repainted thus. Now the English blue fleets were maybe slightly darker than the Scottish but both shades were described as Azure blue. Lothian Green, used by Scottish Omnibuses from 1965 was probably a little darker than Tilling green but under some lighting conditions prints of Eastern Scottish Fleetlines made me think of Mansfield District VRTs. Prior to 1965 a light green and cream was used with dark green mudguards and lining out. Out of the Alexander Companies post-split, Northern received no Lodekkas, which had been ordered for the Fife and south regions (including Lawson) and only had two forward-entrance half cabs until 1978 when a half-dozen former Eastern National FLFs were transferred to them. Northern General group were as far as I can recall the only former BET affiliate to get cascaded Lodekkas and it happened twice; both times before the corporate livery era, some were green and some red. More power to OBP!
Stephen Allcroft
10/05/19 – 06:53
I note the comment about the early FS style bonnet – it is from OPN 801 which was with Wilts & Dorset at the same time as OHR 919. I have a photo of OHR with the registration OPN 801 still applied before the OHR 919 plate was fitted.
Here is my photo of OHR 919 carrying the bonnet from OPN 801 taken at Barton Park, Eastleigh in August 1983.
Dave Mant
11/05/19 – 06:58
I see that the preservationists have removed the Hants & Dorset sunshade from the windscreen to revert to the correct style for Wilts & Dorset (and everybody else). Is there a definitive reason why Hants & Dorset persisted for so long with their unique sunshades? I am sure that the sun in Hampshire and the eastern part of Dorset is no brighter than elsewhere. Perhaps it was a union rep’s obsession that the company felt it had to concede to avoid terrible consequences. Does anybody know the REAL reason?
Bristol Omnibus 1959 Bristol Lodekka LD6G ECW H33/27R
Here is Bristol Omnibus Bristol LD6G – 961 EHW – GL8507, new in July 1959, waiting in Gloucester King’s Square for a driver to take out the bus on the short 50B service to York Road (The Cathedrals). Note the Gloucester Coat of Arms and GLOUCESTER on side, applied to about 25 vehicles, part of the agreement when Gloucester City Council leased out its bus services to Bristol Omnibus in 1935 and which continued uninterrupted until Stagecoach took over the services from Western Travel, the privatised company created by NBC. Bristol Omnibus and Gloucester City Council operated these services, overseen by a joint committee. The bus itself was scrapped in Sept 1976.
Photograph and Copy contributed by Chris Hebbron
22/05/17 – 07:45
Interestingly Bristol Omnibus and Gloucester Corporation both held their own Road Service Licences for the city (joint) routes. Applications in N&P were listed separately. In York and Bristol, where similar arrangements applied, Road Service Licences were in the joint names of the Corporation and company. N&P listings read “Bristol Omnibus Co. and Bristol Corporation” and “West Yorkshire Road Car Co. and York Corporation”. Incidentally the bus is working service 508, formerly 8.
Geoff Kerr
22/05/17 – 07:46
A very interesting post Chris. Major Chapple had just left West Yorkshire to take control of the Bristol enterprise, and his experience with the Keighley and York organisational set-up must have proved of great value. Was the Bath situation set up in a similar fashion, or was that a direct acquisition, with it being a company and not a municipality? I am not aware of the BET organisations making similar agreements with municipal fleets, but perhaps someone will be able to tell us if that were the case?
John Whitaker
22/05/17 – 07:48
Scrapped after only 17 years…What a waste of a thoroughly sound, ideal-for-the-job bus. Or did the Cave-Brown-Cave equipment hasten its demise?
Ian Thompson
23/05/17 – 05:13
My recollection, John W, is that Bristol Omnibus bought, outright, both Bath Electric Tramways Ltd and Bath Tramways Motor Co.. Whether these were municipal or private companies, I don’t know. Again, this was about 1935/36.
Southdown and Portsmouth Corporation entered into a fare-sharing operation after the war, having toyed with the idea pre-war.This agreement involved route-balancing at the end of each financial year, a fascinating sight to see for bus enthusiasts. Buses were swapped, but not drivers/conductors. Thus, Southdown buses, staffed by Corporation staff, appeared some years on Corporation routes and vice versa. PD2’s were common to both organisations for some years and usually swapped, but this was not always so, and I recall a Southdown Guy Arab II performing its task one year.
Chris Hebbron
23/05/17 – 05:14
The Cave-Brown-Cave heating system, which consisted of the relocation of the engine radiator in two sections to each side of the front of the upper deck, was fitted to quite a number of Lodekkas before the inadequacies of the system led to its abandonment by about 1966. Not only did the efficacy of engine cooling suffer, but the very concept of hot water continually sloshing around at the front of the upper saloon meant that the vehicle interior continued to heat up in the hottest of weather. The early Cave-Brown-Cave Lodekkas had a completely blank front panel with no conventional radiator grille, but these were soon fitted with a front radiator to ease some of the problems. I think that many had the C-B-C completely disconnected, but the equipment each side of the destination indicator remained in situ. I, too, am surprised that this bus should have gone to the scrappers so early, not least because it had a Gardner engine. The ‘in house’ Bristol BVW option was a pretty poor alternative that gave endless trouble from failure of its wet cylinder liners – AEC was not alone in suffering this problem, but Dennis used wet liners successfully from the 1930s, so it could be done.
Roger Cox
24/05/17 – 06:43
There was no municipal involvement at Bath (or Cheltenham). Bath Electric Tramways and Bath Tramways Motor Co. ceased trading at the end of 1969, their assets transferred to Bristol Omnibus Co., while Cheltenham District Traction was wound up in 1980, 30 years after passing to Bristol control. When the EHW series of Lodekkas appeared in 1959, with CBC heating and hopper vents, there was a heatwave and reports of passengers passing out.
Geoff Kerr
24/05/17 – 06:44
Bath Electric Tramways and its motor bus associate business, Bath Tramways Motor Company, were BET companies dating from 1904 that were sold to the Bristol Omnibus Company in 1936.
Roger Cox
24/05/17 – 06:46
I’m a bit puzzled by the comments expressing surprise that this bus only lasted 17 years. I would have thought 17 years was a reasonable innings for a bus of this period. No doubt its 6LW engine would go on to give many more years service ploughing across the South China Sea!
Eric Bawden
25/05/17 – 10:57
Taking up Roger’s comments on the shortcomings of the Bristol engines I have always wondered if these engines were foisted on the Tilling companies who would have logically chosen the reliable and fuel efficient Gardener given a free hand. Was it that Gardner could not keep up with demands or was it a face saver for Bristol to have at least some Lodekkas with their own engines?
Philip Halstead
26/05/17 – 06:47
The AVW had an equivalent power output to the Gardner 6LW but dimensionally was roughly the same size as a 5LW and an AEC 7.7L. From that you can immediately think that given 40s/50s materials something had to give i.e. AVW longevity given the close positioning of the 6 bores and higher temperatures. When running well the AVW was a good engine but unlike Gardners which just go on and on even with reduced performance AVW bottom ends tended to go bang with no warning. The BVW coming out at a time of heavier vehicles was never up to the job.
Roger Burdett
28/05/17 – 08:09
I always thought of BT&CC/BOC as a ‘wealthy’ operator. The policy was that most vehicles were replaced at between 12 and 17 years. This compared with the ‘poor’ companies in the same group such as Western National and Thames Valley who kept buses for a lot longer. Remember who was operating the last K & L types in service. I think the reason was competition. Bristol had no competition whatever on urban services in Bristol, Bath, Gloucester, Cheltenham or Weston. The ‘poorer’ companies had less urban routes, large areas of rural routes and faced a certain amount of competition in places.
Peter Cook
29/05/17 – 06:58
Philip, Bristol had a history of building its own engines right from the outset. Gardner’s economical Diesel engines came onto the scene in the 1930’s and Bristol decided to offer them as an alternative to its own MW and NW petrol engines at that time. However, by the end of the ‘thirties large petrol engines in buses and heavy lorries were in decline as the benefits of Diesel economy and reliability came to the fore, so Bristol’s decision to build its own Diesel engine would have been a quite logical development. The first of a handful of experimental units was fitted to a Bristol T&CC Bristol K5G in 1939 and designated XOW (eXperimental Oil engine – W signifying an engine under Bristol’s system of using letter designations for major units). A dozen engines were then produced in 1946 incorporating various modifications (becoming the VW engine), before production started in earnest, with the engine becoming the more familiar AVW, a 6-cylinder 8.1 litre direct injection engine developing 100bhp @ 1700rpm. The 8.9 litre BVW engine went into production in 1958/59, following trials with a handful of prototypes in 1957. It developed up to 115bhp@1700rpm, although operators could have the unit derated to give 105bhp@1700rpm if required. Unlike the AVW, which had an aluminium crankcase mated to a cast iron cylinder block with dry liners, the BVW had a one-piece cast iron crankcase/cylinder block assembly and wet liners. West Yorkshire’s BVW engines generally proved reliable workhorses, with many achieving over 300,000 miles between overhauls. True the wet liners did require attention from time to time, as the neoprene sealing rings started to perish with age. The usual giveaway was water weeping out of small ‘tell-tale’ holes on the side of the cylinder block – each cylinder having its own set of holes. It was advisable to replace sealing rings on all six cylinder liners even if only one was weeping, as the others being of similar age, would no doubt soon follow suit. As such things as cylinder heads, sump, inlet and exhaust manifolds, water rails, hoses etc had to be removed in order to remove one liner (plus its piston and conrod), it was certainly more expedient to only have to remove these items once rather than up to six times as each cylinder’s rings failed in turn! (Yes it does sound like common sense but…….!). The liners could be removed and replaced using a hand-operated hydraulic pump, with the engine remaining in situ, and piston ring and bore wear never seemed to be a real issue on WY’s BVWs, whether the Lodekkas so fitted had CBC or conventional radiators. Relating to the supply of Gardner engines, I think it is often forgotten that although Gardner was a premium engine builder, it did not only supply much of the bus and truck industry, but also supplied a sizeable section of the marine market as well. This not only included manufacture of marine engines of various sizes, but also the manufacture of the reversing gear to go with them. Gardner at one point also had healthy orders for the supply of engines for mobile compressors and mechanical excavators. Although Gardner did increase engine production over the years, I often wondered if maybe they just did not physically have the room for expansion at their Patricroft works. This was already quite large, and incorporated aluminium, iron and brass foundries, pattern shops, castings stores and machine shops, drawing offices, engine building/testing shops, various stores and service departments, a power house, and a R&D department. Most importantly there was a large canteen on the site, which I remember using on my first visit there as a WY apprentice more years ago now than I care to remember. The apple pie and custard was beautiful!
Brendan Smith
29/05/17 – 16:58
Thank you, Brendan, for your contribution on the BVW from someone with actual hands-on experience. These are always useful, informative and welcome. My observation is that Crosville used the BVW on all except the last (F-reg) FLFs, and non were ever changed for Gardners, so the BVW must have had something going for it. For me, the combination of BVW engine and Bristol 5-speed gearbox made the most pleasing and harmonious sound of any PSV.
Allan White
31/05/17 – 06:33
I would like to endorse what Alan W has said about the excellent contribution made by Brendan. I was a regular user of the West Yorkshire Road Car Company services in the fifties and early sixties and know what an excellent bus fleet they operated with tight control from Harrogate. They operated over avery wide area including urban routes in Harrogate, Bradford, Leeds, Keighley and York as well as many rural routes such as to the East Coast and Yorkshire Dales. I always regarded WYRCC as an ex Tilling flagship company with an intention to always have a modern image efficient fleet, so bus life generally was no more than 16 years. Sadly all these wonderful attributes changed in 1968 with the imposition of the National Bus Company and later the demise of the Bristol Commercial Vehicle Company and Eastern Coach Works in the eighties was the final nail in the coffin.
Richard Fieldhouse
31/05/17 – 11:18
Richard, obviously some were better than others, but in general the same could be said about most of the former Tilling Group companies, it certainly applied to United Automobile Services in this area. The vast majority of BET companies were also well run, but that all went out the window post 1968 when NBC “No Body Cares” sorry, National Bus Company took control. A few choice ones that are not fit for publication, but its strange how nobody seems to have a good word to say about that particular government folly. As for the demise on Bristol and ECW? The same thing happened to AEC, Daimler and GUY when they were all lumped together under the control of British Leyland, not to be confused with Leyland Motors. After several years of development the end result was the Leyland National. The later ones were actually quite a good vehicle, but the early versions were an absolute abortion that would never have survived healthy competition had there been any, but operators were given two choices, take it or leave it, because there isn’t anything else. How could they have spent so much time and money on development and got it so wrong. This is only my opinion. However, at the time I was a driver for NGT at their Percy Main Depot, although running at a profit was essential for the survival of the company, it was run by people who knew the bus industry, and our vehicles were well turned out and maintained to a very high standard. Enter the new regime of NBC, they are run by government appointed accountants, most of whom have never been on a bus since they left school, but they know the price of everything and the value of nothing. They apply the principle of find the lowest common denominator, as a result, pride in fleets is destroyed, standards drop, and once well turned out fleets now just look shabby and neglected.
Ronnie Hoye
01/06/17 – 07:20
The suffocating hand of NBC didn’t happen until the Tory government of Edward Heath appointed Croda industrialist (and twice failed Conservative parliamentary candidate) Freddie Wood in 1972. Croda was a company supplying chemical products to the beauty products industry, and Wood was a believer in extracting high margins from modest sales volumes. He brought the Croda creed to an industry of which he was totally ignorant, believing that those backward bus passengers required a bland, countrywide brand to become aware of the services on offer. Buses should be sold like supermarket baked beans by inventing a new, uniform, national identity. A public transport user in Aldershot could only then appreciate the “products” on offer if a bus passenger in Bristol or Buxton was given identical branding and operating standards. Crucially also, not just profitability but notably good margins to satisfy his political overlords were the prime objectives. Cost control (and corner cutting) became paramount. The rest is history.
Roger Cox
01/06/17 – 07:21
For whatever reason though Bristol engines were never made in large quantities so operators were either ultra conservative or whole life costs were higher than Gardner/Leyland. I have more knowledge of Gardner-Daimler comparisons and whole life costs definitely favoured the former despite the inherent smoothness of the Daimler unit
Roger Burdett
02/06/17 – 07:10
Allan and Richard, thank you for your kind comments. I enjoyed every minute of my eighteen years working for West Yorkshire (fourteen of those in the engine shop), and even in its NBC corporate days the Company tried its best to maintain certain standards. Much of this was no doubt due to the people in charge, including in later years Brian Horner, the general manager and Tom Fox, the chief engineer. The Company did fall short at times when circumstances seemed to conspire against it, and there were periods when buses had to be hired from other NBC subsidiaries just to keep the show on the road, but such situations were not peculiar to just West Yorkshire at the time. Ronnie and Roger (C), you have both raised very valid points about NBC, the corporate identity and the bone paring thrust upon it by Freddie Wood, and I tend to agree with much of what you have both said. In the ‘seventies the mantra was often “big is beautiful”, and any large company worth it’s salt ‘had’ to have a corporate identity and a logo, which presumably wooed Freddie Wood. British Leyland was another case in point, and following all the various takeovers and mergers “became too big to be allowed to fail” as the modern saying goes. So when it eventually did in 1974, it was taken into state ownership to protect thousands of jobs. A shame then that this was not appreciated by certain sections of the workforce, and in the bus and truck world the arrogant attitude of some members of British Leyland’s senior management towards its customers probably did not help matters either. Roger (B), probably the main reason that Bristol engines were not made in such large quantities was to do with the ‘closed market’ within which Bristol was required to operate. There was an expectation for it (and ECW) to operate at a profit, despite being denied the potential to expand its market by the private sector, so maybe Bristol endeavoured to produce as much ‘in-house’ as it possibly could. On the subject of engines, it is interesting to note that while Bristol chose not to offer Leyland engines in its buses and coaches through the ‘fifties until the mid-sixties, it did do so with its lorries of the period. Could it have been that the Bristol AVW and BVW engines could not provide the extra power required for road haulage operations? From a purely selfish point of view, what a pity we were denied the opportunity to savour such delights as a Leyland-engined Bristol K, L, LS, or Lodekka LD. It has also deprived Roger of carrying out one of his beautiful restorations on such a beast. Unless the opportunity arises for a conversion Roger…..?!
Brendan Smith
03/06/17 – 07:20
Roger (Cox) has hit the nail on the head. NBC gets a lot of flack for happenings which were not of NBC’ s making. I worked for NBC in the early years. People should remember that “local” management was still staffed by exactly the same people who had managed the companies in Tilling and BET days, and who were “bus men” through and through. The “bean counters” and those who acted as middle men between NBC and the Government were the problem,together with those who refused to see that the prime object of business is to make a profit and not sponge off the public purse. There was nothing wrong with NBC as concept, and there was certainly nothing wrong with the Leyland National (as a concept) – it should have been the finest bus ever built. However changes in political thought and undue interference from those “on a power trip” is always a recipe for disaster. NBC was conceived as a much enlarged THC, and Central Activities could have been a highly profitable coach operation, but their potentials were never realised. The only saving grace was that the PTE s and deregulation/privatisation were even bigger disasters (financially) than NBC !
Malcolm Hirst
24/10/17 – 06:57
Gardners were marine engine builders primarily. It was Bartons at Chilwell who first used Gardner engines in buses – Simon Barton’s grandfather was the first to fit them! Stolen Gardner bus engines have turned up fitted to ships. The Royal Hong Kong Police arrested a junk in 1979 which was fitted with a Gardner 6LX which had been stolen from the burnt out wreckage of Belfast Corporation Daimler Fleetline No. 714 (714 UZ) which had been hi-jacked and burned on 21st July 1972 at North Queen Street, Belfast!
Bill Headley
28/04/18 – 07:40
The route balancing described above between Southdown and Portsmouth also applied in Bristol between the City services and the Country services when I was there in the 1960s. In summer there were extensive weekend reliefs on Bristol to Weston-Super-Mare, which were turn up and go with a constant queue, and City KSWs were loaned for this, possibly as much for staff availability as for vehicle supply. To maintain the mileage balance Country service vehicles could be seen from time to time on City routes. I don’t remember any “On hire to …” notices were necessary in the window.
Bill
30/04/18 – 06:10
In response to Bill’s post above, I also remember the bank holiday’s on service 24 as the Bristol to Weston-super-Mare route then was. Living on the Weston side of the city we had to try to board on the outskirts of the city. We waited ages for a bus with any space and usually had to stand the whole way. ‘On hire’ notices were not necessary as there was no difference between the legal lettering of BJS (i.e. Bristol City services) and Country service buses. Country buses operating on BJS routes were known as ‘B fleet’ duties. Athough they would balance the use of City buses on country routes at bank holidays, the primary purpose was to balance up for mileage operated by BJS vehicles on parts of BJS routes outside of the city boundary. As an example, at that time, Kingswood was outside of the city but had a BJS bus service from the city centre. The mileage from the boundary to the terminus and back worked by a BJS bus would be calculated and that amount of mileage would then be worked by a country bus on a BJS route. I just find it odd that at a time when such things had to be done either on a comptometer or even manually, they worked it out to the last furlong; now we have computers, I doubt whether anyone would bother.
Peter Cook
08/09/22 – 06:24
The seating split of 961 EHW (shown) is in fact H33/25R, not H33/27R. Bristol’s LDs were 58 seats, as can be seen by the gap between the sideways facing seat and the forward facing seat where there was a luggage rack over the wheel on each side.
West Riding Automobile 1955 Bristol Lodekka LD6G ECW H33/25RD
Around 1958, the Chief Engineer of West Riding, Ron Brooke, entered into collaboration with Guy, who then had an impeccable reputation for sound, robust engineering, in the design of a maximum capacity front entrance, low floor double decker, similar in concept to the then very new Leyland Atlantean, but with the engine mounted at the front. The basic ideas (together with the promise of substantial orders) came from Ron Brooke, but Guy then took up the design challenge with ill judged enthusiasm, incorporating a host of advanced features that ultimately contributed to the downfall of the resulting Wulfrunian model :- See this link The Wulfrunian became the standard double deck purchase for West Riding from 1959 to 1965, by which time the profound deficiencies of the design had rendered it unsaleable to everyone else. When, in 1967, West Riding sold out to the nationalised Transport Holding Company (soon to become the National Bus Company) the new proprietors set about getting rid of the troublesome Wulfrunian fleet. A miscellany of double deckers from other NBC companies began appearing in West Riding green livery (the ex tramway red colour was abandoned, though NBC poppy red was soon to follow) and all the Wulfrunians went between 1968 and 1972, but only after donating their 6LX engines to new incoming Daimler Fleetlines. Seen in Leeds in April 1970 is No.405, XNU 428, ex Midland General 444, one of an entire batch of ten 1955 vintage Bristol LD6G with ECW H33/25RD bodies that passed to West Riding in June 1969. These ex Midland General Lodekkas did not last very long with their new owners, all ten being sold in July 1971, when XNU 428, by then 16 years old, went for scrap.
Photograph and Copy contributed by Roger Cox
31/07/17 – 07:28
Roger, I think the location is Wakefield Bus Station. Service 61 was Wakefield to Bradford direct. Tong Cemetery would be a short working on that route, probably a late evening journey
John Blackburn
31/07/17 – 16:28
I am sure that you are right, John. I was relying on my unreliable high mileage memory, but I was, myself, a bit doubtful that West Riding would be running from Leeds to Tong Cemetery in Bradford. Thanks for the correction.
Roger Cox
31/07/17 – 16:29
Interesting link Roger about the Wulfrunian- thanks. The flaw in them must really have been the Gardner engine, oddly enough- too big, too heavy. Yes, it looks like the old Wakefield Bus Station with Union St behind. Remarkable that they repainted these buses so thoroughly when they only had two year’s life. That’s not a Wulfrunian behind as you may expect- but presumably a Fleetline? The taller drivers of these Lodekkas always looked so uncomfortable with the angled steering wheel and their legs splayed out on to the high floor. Were they?
Joe
01/08/17 – 07:18
I have driven some Lodekkas in my time, Joe, but, after escaping from Halifax Traffic Office in 1966, I went to Aldershot & District as a driver for some 18 months before returning to the admin side of the bus industry. The Lolines were superb machines, particularly the Mk.IIIs, and the driving position (which was not dissimilar to that of a car) soon felt quite normal. Turning the angled steering wheel in tight corners was easier than reaching across the “traditional” flat wheel of other makes (especially if one had something like a heavy PD3 to deal with). The Lolines were the best buses I have ever driven, and I’ve sampled quite a few types over the years.
Roger Cox
01/08/17 – 07:20
You were correct John regarding the late evening service. On Saturdays the 2150 from Wakefield bus station ran as far a Tong Cemetery returning from there to Wakefield at 22:36. The last through service to Bradford ran at 21:33. I managed to pick up a West Riding Time Table for 1970 somewhere along the rallies I attended so was able to check with that.
Brian Lunn
02/08/17 – 07:12
I could never understand why West Riding persevered with the Wulfrunian for so long after the shortcomings must have been fairly obvious with the first batch. Bury, LUT, West Wales, Accrington and County soon got rid of their examples yet West Riding was still ordering sizeable batches. Did they have some sort of contractual commitment to Guy? The failings must have been wider than the problem of combining a heavy front engine with the entrance as the two Accrington ones had rear entrances and a much reduced front overhang but they still didn’t last long. Wolverhampton 71 was an interesting one as this had a forward entrance and I understand drum brakes and seemed to have a more successful service life.
Philip Halstead
12/08/17 – 07:32
Just a guess, but I think the reason why West Riding kept taking repeat batches of Wulfrunians in fact right up to 1965 when it was pretty obvious from the first batch that the design was flawed was because they had to keep faith with Guy Motors because I was told the West Riding GM who had a massive input in its design & actually got West Riding to build it. I think the West Riding GM was called Ronald Brook and he touted the Wulfrunian design around various manufacturers, AEC being mentioned. When West Riding decided to cut their losses & rid themselves of the Wulfrunians,the Halifax Lolines, old Bristol LDs, superior ex Bristol O.C FLFs and keeping lowbridge Guy Arab lVs longer plus new Fleetlines saved the day. All was not lost as a lot of valuable Gardner 6LX power units were salvaged & put in new Fleetline chassis.
Brighton, Hove & District 1959 Bristol LDS6B ECW H33/37R
Seen in Brighton in the summer of 1960 is Brighton, Hove & District OPN 807, fleet no. 7, an example of the rare LDS short version of the Bristol Lodekka with flat lower saloon floor, air suspension on the rear axle, and air (instead of vacuum) over hydraulic braking system. With some adjustments, the LDS model then went into volume production as the FS type. The prototype LDS, an LDS6G with Gardner 6LW engine, went to Crosville in 1958 as 285 HFM, fleet no. DLG 949. In May / June 1959, BH&D received LDS buses OPN 801 to 808, the company’s first Lodekkas, which were powered by the then newly introduced 8.9 litre Bristol BVW engine. OPN 804 to 808 had ECW H33/37R bodywork, but OPN 801 to 803 were CO33/37R convertible open toppers. www.flickr.com/ As delivered, these eight LDS6B buses had the Cave-Brown-Cave heating system installed and, as seen in the photograph, lacked a conventional radiator at the front of the engine bay. The deficiencies of this heating/cooling arrangement, especially apparent with the overheating prone BVW engine, led to its subsequent disconnection and the fitment of a normal radiator, though the cooler running Gardner powered Crosville prototype retained its Cave-Brown-Cave heating and blank front panel with winged motif to the end. OPN 807 served with BH&D until January 1969 when, under NBC “rationalisation”, it passed to Southdown ownership with all the BH&D operations. Withdrawn in 1972, it then went on to Brittain’s in Northampton //bcv.robsly.com/ who sold it, ostensibly for preservation, in June 1979. Having since passed through a number of supposedly preservationist hands, it would seem that it still exists in the current ownership of a dealer, the London Bus Export Company of Lydney, though its current condition is uncertain. If it still retains its BVW engine then spares for that will be scarcer than hen’s teeth.
Photograph and Copy contributed by Roger Cox
18/02/18 – 17:05
Prodded by Roger’s item, I Googled LDX 003 and found Nigel Furness’ book mentioning LDX003 and LDX004 both of which had passed me by! His book also adds that BCV changed the designation of the six LDL 30′ chassis built in 1957 (eg Bristol L8450 – see //www.old-bus-photos.co.uk/?p=34464 to LLD after they were built which explains why I had come across this confusing reference at some time whilst at BCV. Roger’s photo reminded me of one that I took at BCV in early 1964 showing no. 4 with two non-standard to Tilling Group features of these vehicles: the split step (making a ‘stepless’ entry into a stepped access!); and the side route no. indicator. The first feature is still extant in the photo-link of no. 7 in Brittain’s ownership. When I took the photo I had just arrived back at the factory at Brislington after a long spell with BOC so was not aware why no. 4 was at BCV. It was the first of the eight LDS chassis built at the end of the 138th sanction for BH&D, although the last three with convertible open top bodies were given fleet nos. 1 -3. I also have a note to say that its BVW engine was fitted with a DPA (distributor) type fuel injection pump, instead of the original in-line fuel injection pumps of either CAV or Simms manufacture. I’m not aware that this cheaper component was adopted as a standard in later BVW engines.
Geoff Pullin
19/02/18 – 07:07
Whoops – got confused. This photo is of BH&D no. 54, not 4 and hence is an FS6B of the 214th sanction dating from 1964. The bit about DPA pumps definitely refers to 5no. 4!
Geoff Pullin
19/02/18 – 07:08
Thanks for the picture of the “stepless” door platform on these buses, Geoff. I had completely forgotten about these, but I now recall that they were held to create more platform stumbles than they sought to eradicate. Your reference to the use of DPA fuel pumps on these early BVW engines is notewothy. DPA pumps appeared in the mid to late fifties on smaller engines, but this must surely have been one of the pioneer applications on a relatively large commercial vehicle engine. Was it intended to thus equip the production BVW as standard? I am not an engineer, just an interested layman, but I can recognise the appeal of the DPA against the traditional, much more costly, in line pump. The DPA has to work harder serving all the injectors, but the advantages of cheaper and easier replacement together with simplified calibration must have been attractive. Was reliability a problem, and did these early Lodekkas keep these pumps?
Roger Cox
19/02/18 – 07:08
I remember these Lodekkas from my gap year conducting from Conway Street in 1969/70. The lowered rear platform step was said to be popular with all the old ladies of Hove but in rush hour with visitors and foreign students they were also what we now consider a trip hazard. Happy days!
Anthony H
20/02/18 – 06:03
As of Feb 12 it was still at Lydney. Gossip says it was possessed over an unpaid bill. I would have thought offering it for continued preservation would have attracted a buyer.
Roger Burdett
21/02/18 – 07:26
Reading Geoff Pullin’s post regarding Brighton & Hove APN 54B and its modified entrance step, it put me in mind of a similar design modification applied to a East Midland VR some 9 years later. PRR 121L and its low entrance step option was presented to the local press in Mansfield as a help to the aged and infirm. I don’t know how long it lasted but photos on the web show it had gone by the time Yelloway became the owners. I captured my picture when nearly new at Mansfield depot.
Berisford Jones
28/02/18 – 07:37
Berisford’s photograph of East Midland VRT PRR 121L’s step arrangement has reminded me that one of East Yorkshire’s 1973 VRTs (932) was similarly treated, but was converted to standard layout in later life. Maybe such experimental steps were more widespread than maybe first thought.
Brendan Smith
28/02/18 – 12:21
I seem to remember that ECW did about half a dozen VRTs with this step as an experiment in 1972/3 – another one was Trent 631 (RCH 631L), which was converted to normal within a year or so.
Bob Gell
03/03/18 – 06:40
Roger asks about the DPA fuel injection pump. To my knowledge it was never used on production BVW engines, but others may know differently! I can’t find any information about its introduction to other makes of engines but remember that it was used by Leyland on 680 engines in AN68 Atlanteans and later Leopards and probably Panthers. I can’t remember about the 500/510 series. The DPA did have some reliability problems but the reduced initial cost and ease of replacement was probably thought to compensate in Leyland’s eyes. It was not suitable for increasing power outputs at a time that competition was pushing them up. The ‘Power Plus’ series of 680 engines used in trucks were fitted with in-line fuel injection pumps and that was the engine used in the Ribble / Standerwick VRL/LH coaches and why they were able to go ‘uphill at 70mph’ compared to 36ft Leopards, which were stuck with the DPA version because the in-line pump would foul the chassis frame. We had to wait for the Tiger before this power problem was sorted!
Geoff Pullin
04/03/18 – 06:50
From memory the later 680’s had an F&M Friedmann and Maier injection pump fitted.
Andrew Charles
05/03/18 – 08:02
Geoff, thank you for the fascinating information regarding BH&D 4 being fitted with a CAV DPA distributor type (sometimes known as rotary) fuel injection pump when new, as I had no idea of such an experiment. As you comment, the standard BVW engine was fitted with an in-line injection pump of either Simms (SPE type) or CAV (N type) manufacture, although I seem to recall that in later years the CAV pump became the norm. West Yorkshire’s 0.680-engined Bristol RELHs and Leyland Leopards were fitted with DPA pumps as standard, apart from a handful of WY’s last Leopards which had Austrian-built Friedmann & Maier (F&M) in-line pumps. F&M injection pumps were also used on Leyland-engined Leyland Tiger TR and National 2 models. The Leyland 510 engine fitted to the National 1 used the CAV NN-type pump, which was a development of the N-type, the immediate difference being that the NN had its oil supplied from the engine lubrication system, whereas the N was simply ‘splash fed’ by oil from its own small ‘sump’. Also, on the National engine the injection pump was laid on its side rather than being vertical. As Roger says, the cheaper initial cost, ease of removal/replacement and simplified calibration were in the DPA pump’s favour, but I would tend to agree that the pumps would have had to work harder than a larger in-line pump on more powerful engines. The main problem WY had with DPA pumps related to fuel leaks, mainly although not solely, around the banjo bolts retaining the high pressure outlets to the injector pipes. I think Geoff is correct in thinking that the DPA pump was not suited to the steady increase in power outputs on large diesel engines in later years, although CAV did introduce the DPC (Distributor Pump, ‘C’ type) to help counter this, but I’m not sure as to its success. Going back to the DPA pumps, it came as something of a surprise when I first saw one on a 0.680 Atlantean engine. The pump looked so small on the side of such a large engine, especially when compared to the very large (but admittedly long-lived) injection pumps used by Messrs L Gardner & Sons on their range of engines!
Midland General Omnibus Company 1956 Bristol Lodekka LD6G ECW H33/25RD
Photographed in Nottingham in August 1961 is Midland General 453, 972 ARA, a Bristol LD6G Lodekka with ECW H33/25RD bodywork, delivered to the operator in October 1956. This vehicle, together with other buses from across the NBC, went to West Riding in April 1970 to expedite the withdrawal of the troublesome Guy Wulfrunian fleet. Sadly, 453 didn’t last very long in the care of West Riding as it went to the scrapyard in December 1971 having, rather pointlessly, been renumbered No. 408 just one month earlier.
Photograph and Copy contributed by Roger Cox
09/04/18 – 07:39
Such a pity the BTC had such a rigid livery policy with most Loddekkas being in wall to wall red or green. We were denied the opportunity to see such attractive vehicles in attractive liveries such as this one on a wider scale. The Midland General livery seemed to slip through the livery police net somehow but the loophole was soon spotted by the dreaded NBC and the even more dreaded poppy red was soon inflicted.
Philip Halstead
10/04/18 – 05:39
I agree – the only other attractive exception was BH&D, who had cream roofs and a much deeper band of cream around the lower deck windows – oh, and I think that either Notts & Derby or Mansfield District did something similar with Tilling Green and cream. Pity as the ECW body was beautifully proportioned, although too Spartan inside for my taste.
David Wragg
10/04/18 – 05:40
Some Midland General vehicles were initially painted dark blue with a white band and the fleetname in NBC style.
Stephen Bloomfield
10/04/18 – 05:41
Midland General never was a Tilling company but throughout it’s existence as a BTC and THC operator, it’s vehicles were always immaculately turned out, regardless of age and always sported comprehensive, fully working blind displays with via points shown, right until the later FLFs and VRs which had provision for ultimate destination and service number only. It was strict company policy that they must be correctly set too, the word ‘SERVICE’ would never have been allowed, in fact it wasn’t even on the blinds as an option.
Chris Barker
11/04/18 – 06:00
What is often overlooked regarding the BTC’s standard red and cream/green and cream ‘Tilling’ liveries is that when they were first introduced, the Tilling Group was in private hands. For many years the Group had operated a policy of centralised control and one of its aims, post-World War II, was to standardise on its ‘in house’ Bristol-ECW products – namely the K type double-decker in highbridge or lowbridge form, and the L type single-decker in bus or express form. Standard liveries for its bus fleets were also being pursued. When the Tilling Group was nationalised in 1948, outwardly it would probably have looked like ‘business as usual’ to the general public, as the old Tilling liveries remained. Interestingly, when the Balfour Beatty Group came under state control, Midland General, Notts & Derby Traction and Mansfield District retained their original liveries. Later, when the Red & White Group was acquired, Cheltenham District continued with its dark red and cream livery, applied in its distinctive fashion. The BTC did not seem to be as obsessed with rigid standardisation as perhaps the privately owned Tilling Group had been. Although many of the coaches in the BTC fleets donned cream with either green or red/maroon relief, some distinctive and well respected coach liveries continued – those of United, Royal Blue, South Midland, Bristol-Greyhound, and Crosville spring to mind. Presumably prestige and local good will still counted for something, even under state control. When the THC and BET Group were combined to form the state owned NBC in 1969, with the well-intentioned objective of halting the decline in bus use, for the first few years it appeared once again to be ‘business as usual’ regarding liveries. Ironically, it was someone from the private sector – one Freddie Wood – at the behest of the Heath government, who was responsible for the corporate liveries inflicted on the constituent companies in 1972. The standardised poppy red and white, or leaf green and white liveries for buses and ‘local coaches’ and the allover white National coach livery were not a patch on the liveries they replaced. In fairness, the introduction of the ‘National white coach network’ did improve public awareness of express travel and business did increase as a result, but why such an impractical colour was chosen for such hard working vehicles operating over long distances in all weathers remains a mystery.
Brendan Smith
11/04/18 – 06:04
Midland General, together with Notts & Derby and Mansfield District, were Balfour Beatty companies. Balfour Beatty initially concentrated upon tramway operation in Nottinghamshire and Derbyshire, whence it then broadened its activities into electricity generation and supply in those counties. When the electricity supply industry was nationalised in 1948, that aspect of the Balfour Beatty operation was taken over by the government, but the three public transport components of the business, by then using trolleybuses and motor buses, did not automatically follow suit. The disposal of Midland General, Mansfield District and Notts & Derby was a decision taken by Balfour Beatty in the light of the then Labour government’s aspirations for public ownership of the bus industry. Tilling sold out at about the same time, but the BET resisted. I agree with Chris that the standards of Midland General were very high, endorsed by the splendid livery.
Roger Cox
19/04/18 – 06:35
The reason that the Midland General fleet could be so smart was that the services operated were extremely profitable compared with other operators such as Trent.
Nigel Turner
20/04/18 – 06:40
Indeed so Nigel, Midland General had some very lucrative routes and on weekdays they operated many works and colliery services which operated throughout the day to meet changing shift patterns. On Saturdays, when vehicles which had been used on such duties might otherwise have stood idle, many of their principal services were so busy with shoppers, they were doubled in frequency, so the fleet was fully utilised. A blue livery and a blue chip company!
Chris Barker
23/05/18 – 06:47
Roger, the shareholdings of MGOC/NDT/MDT were all held by the Balfour Beatty subsidiary “MIDESCO”, the Midland Counties Electricity Supply Company – it was MIDESCO which was nationalised as part of the compulsory nationalisation of the electricity supply industry, becoming part of the British Electricity Authority (BEA). It was because Balfour Beatty chose not to separate out the accounts for MGOC/NDT/MDT from those of the parent (MIDESCO) that they were nationalised (as part of that electricity supply company). Initially the BEA negotiated with a management agreement with Balfour Beatty for “oversight” of MGOC/NDT/MDT, but this lasted only months until the BEA transferred MGOC/NDT/MDT to the BTC. The Llanelly & District company ended up in state-owned hands for similar reasons, but the outcome then was quite different.
The location of the photo is the old Mount St bus station in Nottingham, a place I was most familiar with, since I lived in Nottingham until 1964, and my bus home (either the Nottingham City Transport 63 or more usually the Midland General F5) left from there. It was a pretty basic facility, and I understand it was actually a genuine wartime utility bus station! Presumably the utility Guy Arabs in the Midland General and Barton fleets, which in the early 1960s were regulars there, felt at home in the place. I believe the place was built to ease overcrowding at Nottingham’s original Huntingdon St bus station, and would also save a bit of mileage for routes from the west,, probably an important consideration during the war. I always found the Midland General buses to be well presented and reliable, but it always seemed strange to me that travelling to and from school on the F5, usually on the same departures each day, you never knew what vehicle would turn up – anything from a utility Guy to a brand new Lodekka. The route was worked by Ilkeston Depot, and they seemed to have no consistency as to what was sent out on what duty. Mount St was replaced by a new smaller facility nearby after I left Nottingham, but that had a fairly short life before closure.
Potteries Motor Traction 1965 Bristol FS6G ECW H33/27RD
New to Brighton Hove and District as fleet number 67 this was one of a pair of these Lodekkas acquired by PMT in NBC days as Driver Training vehicles. The yellow NBC style livery is rather attractive. Seems a strange vehicle type to transfer to an ex BET fleet with no previous experience of this model. Photo taken at Woodhouse Street, Stoke outside the main works in July 1978
Photograph and Copy contributed by Ian Wild
22/04/20 – 06:46
These two buses were added to the PMT fleet at the end of 1976 and if my memory serves me right one was received in NBC green whilst the other had traditional Southdown livery. These buses were newer than all of the Leyland Atlanteans and most of the Daimler Fleetlines still in operation at that time, but these were not suitable for Driver Traning duties by virtue of having semi-automatic transmission. At that time to obtain a licence to drive all type of PSV a driver had to have undertaken at least part of the PSV training on a bus with fully transmission.
Leekensian
23/04/20 – 06:40
Thanks for the comment. In 1976 PMT would still have Ford coaches with manual transmission (and maybe Reliances 986-991 and 1041 -1043, possibly some Reliance service buses still with manual transmission). Most BET fleets had gone over to forward entrances for their later half cab deliveries and rear entrance buses were easier (and cheaper) to adapt for driver training. An interesting interlude and interesting comment about liveries as received.
Ian Wild
23/04/20 – 08:27
I agree that the livery is quite attractive, probably aided by how impeccable the bus looks. Is it still or no longer the case that PSV drivers must have some experience of manual transmission? The Stagecoach learner buses I see around locally (all single deckers, although the fleet has double deckers, too) are so old as to suggest that they have manual gearboxes. They are of the high-floored variety coach type with steep steps into the vehicles.
Chris Hebbron
24/04/20 – 06:08
In 1976 PMT still had a large number of Leyland Leopards and AEC Reliances from the batches delivered between 1962 and 1965 – 921 to 950, 976 to 985 and 1036 to 1040. One of 1963 Leopards (927) was converted to a Driver Trainer in 1977 and carried the same livery as the two Bristol FS6G. Unfortunately all of the heavy weight(some might say decent) coaches had been withdrawn by PMT in 1973 to be replaced by twenty Ford coaches with Duple Dominant Express bodywork. I have often wondered if the coaches were withdrawn prematurely to take advantage of the bus grant scheme or in order to improve the profile of the coach fleet. A further link between PMT and Southdown also took place in 1976 when six 1965 Leyland Leopards coaches were purchased and carried PMT fleet numbers 10 to 15.
Leekensian
24/04/20 – 06:09
Chris-so far as I am aware the use of high floor coaches is more to do with a requirement that buses used for PCV licence testing (and hence training) are fitted with ABS brakes. Modern coaches are so fitted (again by law) hence meet the required standard.
Ian Wild
25/04/20 – 06:29
Ian; When this came into force my local operator, First Eastern Counties, had to use the newest Volvo coaches (R reg) for driver training and the N&P reg ones for revenue earning services. Shortly before the ABS requirement I had passed my class D driving test in a 26 year old Bedford YMT which obviously did not have ABS.
Nick Dasey
26/04/20 – 06:10
Even when delivered in 1966, the FS did not appear to be the bus for the future of the industry! Several of the last batch went to Tilling companies that already used FLF forward entrance deckers. So why revert? I recall United Counties had several of this last batch, with the reliable 6LW Gardner engine and without CBC radiators and thus engineering-wise were very reliable vehicles. But not much use when one man operation of double deckers came to the industry within two years of the delivery. United Counties carried out careful conversions of four of their last FS6G into Driver Trainers and, in at least one case, combined with tree lopping duties, complete with trailer for carrying the cuttings. They were out-shopped from Northampton similarly to the PMT version in an immaculate yellow version of the NBC livery. I think samples are still running and there are photos on Flickr. PS: I remember collecting Eastern Counties last FS5G from Lowestoft in 1966!
Geoff Pullin
26/04/20 – 06:12
Nick, I really admire your gall to go public on this site to say that you passed your test in a Bedford! Perhaps our illustrious ‘blogmaster’ could start a separate topic heading, so that we might be able to regale tales of what we passed our PSV test with? just an idea? (Tin hat time from our beloved Bedford fans, I fear )
Mike Norris
27/04/20 – 07:25
Mike, you think that admitting to passing a test in a Bedford is bad, it get’s worse. I also passed my class 3 & 1 HGV tests in Bedfords and worst of all, I still own the coach.
Nick Dasey
27/04/20 – 07:25
Well, I learned and passed my test in a magnificent (6 speed) 6U3ZR. Of course, purists might (justifiably?) say that learning and passing on a constant mesh decker is something of which to be more proud.
David Oldfield
27/04/20 – 07:27
I passed my PSV test on either DPM66C or DPM67C I don’t recall which one, having trained on both of these buses whilst at PMT in 1978. My assessment was undertaken on the aforementioned Leyland Leopard 927 (927 UVT).
Leekensian
28/04/20 – 06:27
I did my initial PSV training at PMT on dual control (and Metalastik toggle link suspension fitted) AEC Reliance 470 5596. I progressed to PD2 L466 (which suited me as it had a sliding cab door) and finally PD2 L337 which I wasn’t keen on. The Instructors were Gerry, Sam And George Clews who was the Examiner. He somewhat reluctantly advised me that I had passed my test. Something about being an Engineer, I wouldn’t have to drive a bus in anger!!! Happy days
Ian Wild
29/04/20 – 06:24
I recall that the primary use of T5596 was to train Conductors in order to obtain a Car licence. George Clews took me on an assessment to drive a Company car but my PSV test was undertaken by a Ministry Examiner. The man in charge of the PMT car pool was an affable man, Bill Corden who I remember was also the Chauffeur to the General Manager. His initial greeting when encountering him was ‘haven’t we got good jobs’. Indeed happy days. There is a link on the SCT’61 site regarding T5596.
Leekensian
30/04/20 – 05:54
I remember Bill Corden, great bloke in charge of the private car garage. Bill was very helpful and encouraging to me. His usual greeting to me was ‘How’s the fleet!” Characters!!
West Riding Automobile 1966 Bristol Lodekka FLF6G ECW H38/32F
Proceeding on a very wet day into Leeds city centre is West Riding No. 452, Bristol FLF6G HHY 183D with ECW H38/32F bodywork, originally delivered to Bristol Omnibus as C7280 in October 1966. When, in 1967, West Riding sold out to the Transport Holding Company, which became the National Bus Company in 1969, steps were taken to withdraw the very troublesome Guy Wulfrunian fleet, and to secure this end as quickly as possible, buses were transferred from various parts of the NBC empire. This FLF6G was sent from Bristol Omnibus to West Riding in February 1970, so it had not been there very long when I took this picture in April of that year. In November 1971 it was renumbered 544 and stayed with West Riding until 1980, during which period it acquired the abysmal NBC poppy red livery. It was then sold to Top Deck Travel of Horsell Common with whom it spent several years in the USA up to 1986 before finally being consigned to the scrapyard in 1989. I acknowledge this very informative website as the source of much of the foregoing information:– //bcv.robsly.com/lodekka.html
If it’s not my imagination, this bus appears to have hub caps on the rear wheels. If this is the case, was this a West Riding feature carried forward to this hotchpotch of foreign incomers!
Chris Hebbron
02/10/20 – 06:41
This is a good point, Chris. I have blown up the picture on my computer screen, and you are right. I hadn’t noticed the rear wheel trims, rather similar to those on London Transport RT/RTL/RM/RF types. I have looked at my own pictures of other West Riding buses – Guy Arabs and Wulfrunians, Daimler Fleetlines, AEC Reliances, and other’ imports’ brought in to ease the Wulfrunian crisis, and none have these wheel trims. Perhaps an OBP expert can enlighten us.
Roger Cox
02/10/20 – 06:42
The black fibreglass rear wheel trims were introduced as standard NBC spec. mid 1960s to all Bristol chassis. Somebody must have thought it looked smart and perhaps would aid mechanical vehicle washing without asking the operating engineers. The need to remove the covers for every tyre pressure check and wheel nut tightening led to depots under pressure (pun not intended!) leaving them off and then taking off the fixing brackets which incorporated a spring loaded catch and became a bit of a danger as they stuck out, being bolted to the axle shaft hub. Few Chief Engineers insisted on re-instatement because the newer vehicles then looked the same as the earlier deliveries and weren’t noticed! No doubt there were enthusiast depot engineers (usually at smaller and remote locations) around the country who took pride in retaining the wheel covers in good condition.
Geoff Pullin
02/10/20 – 06:44
I wonder (suppose, really) that I’m the only person who thinks the ECW Lodekkas are amongst the best looking double deckers ever to enter service. Angular, functional, almost minimalist design which was of its age, no doubt, but which still looks perfect for the job it was designed to do. Or is it my age and I haven’t moved on – old buses are as much a part of me in the same way I still look at TV actresses from that era and think that Jan Francis, Paula Wilcox, Felicity Kendall etc, etc haven’t really been improved upon 50 years later??
Stuart C
03/10/20 – 06:33
No Stuart C, you’re not the only one who considers the Lodekka to have been among the best looking double deckers. I must admit to a slight preference for the rear entrance variety, with their more raked fronts. Having been a conductor for a brief period, I also appreciated the extra space on the platform – on an FLF, I always seemed to be in the way!
Nigel Frampton
03/10/20 – 06:34
It’s nice that these vehicles arrived in time to wear the traditional West Riding livery and fleetname, if only for a couple of years. As Roger says, the adoption of NBC poppy red was regrettable and something of a mystery when every other NBC fleet for miles around was also red, the nearest fleet to opt for green was perhaps East Midland, a considerable distance away. It’s also good to see that WR went to the trouble of having non-standard destination blinds made to fit the aperture which was nothing like their own standard display. Dare I say, some may have been content to simply show the word ‘Service’.
Chris Barker
03/10/20 – 10:26
This photo also illustrates how the cream glazing strip that ECW used for a few years made the destination aperture look smaller. In this case it looks as if the already small lettering is too big, yet with black glazing strip it would look fine! If I remember rightly, the cream rubber coincided with complaints that the older green leathercloth interior side panels and green criss-cross Formica on seat backs looked a bit dull. It always looked to me that the response was that of an engineer looking through the pattern books (and certainly not an interior designer) – and choosing golden leaves cream Formica instead. The radiator cap also looks to be painted red. That was most probably part of the necessary operation in those days of using antifreeze only during the winter and the cap would have been painted red (or a different colour each year) for drivers to know that it needed topping up with antifreeze mix and not water. Happy days! Did anyone else feel vulnerable sitting at the back downstairs of an FLF? I always avoided those seats!
Geoff Pullin
08/10/20 – 06:50
Chris. This isn’t the “traditional” West Riding livery – it is Tilling green which West Riding adopted after it sold out to the THC, the traditional West Riding green was a shade lighter/brighter. I understand that the decision of West Riding to adopt NBC poppy red was driven by the Regional Director who wanted an “all red” Region; I suspect that the West Riding Group GM, Fred Dark, who had come from Yorkshire, didn’t put up too much resistance given that if West Riding had adopted leaf green then Yorkshire would probably have had to do the same under NBC’s rationalist policies.
Philip Rushworth
09/10/20 – 16:13
Presumably this bus, being quite new on its transfer to West Riding, simply retained its Bristol Omnibus Tilling Green.
Roger Cox
10/10/20 – 06:56
As I understand it, West Riding adopted NBC red because the regional management wanted an “all-red” area as Philip says, but that wasn’t universal across all areas of NBC. In the south, Western National used green, but Devon General (which was by then under common management with WN) used red. A similar situation applied to Provincial (green) which was managed by Hants & Dorset (red); and Cheltenham (red) was a subsidiary of Bristol OC (green).
Nigel Frampton
21/10/20 – 06:46
West Riding were a partially red fleet for many years as the former tram routes were run with red vehicles West Riding had actually begun to change from their traditional green to Tilling green before the Lodekkas began to arrive. On the subject of the use of NBC red there is an apocryphal story that Yorkshire Woollen and West Riding tossed a coin and West Riding lost!
Chris Hough
14/11/20 – 07:38
I am coming to this a bit late, but I have been very interested to read all the comments in the string above. I have not worked on buses, as Nigel Frampton has, but purely from a user point of view, I loved the Bristol Lodekkas. When I was a boy in York I would try to get my mother to take us home from Exhibition Square, where the routes 2, 8 and 12 home were all Lodekkas, rather than from Stonebow (mostly VRs – which I also am now very fond of). I read a very good book about the Routemaster, in which the author referred to the Lodekka as a Behemoth. I think that was unfair! When I moved down to London in 1989 I enjoyed being able to step back in time to use the Routemasters, but they did seem very narrow and rickety compared with the Lodekkas.
